Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner-operator walkthrough focused on spring tiller maintenance, specifically on a Mahindra MT-150 (Korean-built, three-branded unit). The video covers checking the transfer case dipstick, gear case oil level, greasing all zerks and driveshaft knuckles, and clearing tine entanglements, then shows the tiller working through garden beds and fresh sod in Iowa black soil. Best for compact tractor owners prepping a similar rear-tine tiller for the season.
Pull out the plug on top, wipe off the attached dipstick, reinsert it, and check that fluid is submerged up to the marked fill line.
The gear case takes 90-weight gear oil, filled from the top plug until it starts coming out of the lower check hole, confirming it is full.
The service plan calls for a first check at 30 hours when new, then every 20-hour intervals after that.
Look at the end bearings for any entanglements or material wrapped around them, since that is what causes wear over time.