Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner-documented DIY valve adjustment on a Branson 3520H (engine knocking complaint). The video walks through removing the loader pin, folding the hood, pulling the alternator and bracket to access the valve cover, finding a displaced valve component, and adjusting rockers with a feeler gauge. It's a practical hands-on fix rather than a buyer's guide, most useful to owners facing the same knocking noise who want to attempt the repair themselves.
The dealer said the valves needed adjusting, which caused a slapping noise, and the fix was to pull the valve cover and adjust the rockers and valves.
The dealer said to remove the DPF filter, but the owner chose not to and was still able to work in there without removing it.
No, the dealer said it has a reusable gasket, so there is no need to change the gasket.
Raise the loader, pull the pin, fold the hood down, remove three 17mm bolts and the breather hose, then remove the alternator and bracket.