Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is an owner's hands-on install-and-break-in video for a 72-inch Bercomac quick-attach snowblower on a Branson 5520 CH, not a dealer walkaround. It covers unboxing and assembly quirks, cable routing and battery box modification, fuel-injected engine startup and clutch burnishing, then real first-use feedback on bucket float, tilt angle, and an awkwardly placed safety switch. Useful for owners planning their own install and troubleshooting setup issues.
Posted by an owner-operator documenting his own tractor and attachment as he sets it up and learns its quirks firsthand.
The frame ships bolted underneath the pallet, so you remove those bolts, save them, move the frame, and reattach using supplied plastic friction nuts instead of the original hardware.
Because it is fuel injected and empty of gas, the first start took about ten seconds of cranking, likely because the oil filter needed to fill before oil pressure allowed the engine to run.
Start the tractor and engage the front clutch control about ten times, on and off, to smooth and loosen the clutch fibers so it disengages properly, especially if ice has frozen it.
Setting it to float pushes the heavy blower down hard into frozen gravel, so the owner instead sets it lightly on a cleared spot and barely touches down rather than using full float.