Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A focused how-to on servicing a rotary cutter's slip clutch before mowing season. Mike walks through the full annual burn-in procedure step by step: marking the clutch assembly with a paint pencil, loosening the six retaining bolts, cycling the PTO on and off at full engine speed, verifying slip by checking mark alignment, and torquing back to a 4mm gap spec. Best for rotary cutter owners doing seasonal prep.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
Remove the PTO shaft, mark the clutch hub and Belleville spring, loosen the six bolts, cycle the PTO on and off five or six times, then check the marks and retorque to a 4mm gap.
If the cutter sits outside and moisture gets into the clutches, they can freeze or weld together, leaving no protection for the gearbox and PTO shaft.
Check the paint pencil marks on the hub and Belleville spring. If they are no longer aligned after cycling the PTO, the clutches slipped successfully.
Tighten the six bolts until there is a 4mm space in the gap of the slip clutch assembly.