Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A dealership walkthrough focused entirely on the mechanical steps for detaching and reattaching the MF SBX.1270 snowblower on a 1M.25, covering two scenarios: removing just the snowblower from the subframe, and removing both snowblower and subframe together. It walks through each pin, PTO shaft connection, hydraulic couplers, and the foot drop sequence. No pricing, performance, or operating content; most useful to owners learning this specific attachment/removal procedure.
Posted by the GibbsvilleImpl channel, which appears to be a dealership preparing a tractor for customer delivery, expect a sales- or service-oriented presentation rather than an independent owner perspective.
Drop the foot and lock it low, pull the pins on each side, disconnect the PTO shaft by pulling the collar back, detach the hydraulic rotation couplers, then slide the snowblower off the subframe.
Remove the pins on each side, take off the mid PTO cap by pulling the collar back, drop the foot on the subframe using its keeper pin, then back the tractor away from the subframe and snowblower.
Drive forward until the pin hits the frame, lift up so the ear locks onto the bolt head, reinstall the pins, lift the foot back up, and hook the mid PTO shaft back up.
