Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This video is a point-by-point rebuttal defending the claim that rear three-point ballast relieves stress on a compact tractor's front axle, a position the host says drew hundreds of hostile comments on Facebook. He walks through the physics, references scale tests done by a tractor-product manufacturer (ICTC Quick Attach), and discusses why some brands rate lift capacity higher than others and the front-axle failure patterns that can follow. Best for owners who already know the basics and want to think harder about ballast and loader limits.
Yes. A scale test by Jake at ICTC Quick Attach showed that adding roughly 600 pounds behind the rear axle while lifting about 600 pounds in front greatly reduced strain on the front axle.
If you don't put enough weight behind the rear axle, you don't relieve any strain on the front axle. You just make the tractor heavier and increase total strain on the machine.
Newer manufacturers often offer higher lift capacity to compete and build a reputation, while established brands like John Deere and Kubota limit capacity to reduce failures and protect their reputation.
The host says breaking the tractor in half from front and rear weight is more a hypothetical concern, since many loaders have support tying back behind the rear axle for strength.