Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A first-time walkthrough of the coolant drain procedure on a Mahindra Max 26XL/XLT, with noted applicability to the 1525/1526 models. The owner works through locating the drain hose (6mm clamp, extension required), the two-pan setup needed, reservoir bottle removal, and refill specs (5.2L/5.5 qt, 50/50 mix). Skips the flush cycle and refill steps on camera. Best for Max owners tackling this job themselves for the first time.
An owner-operator documenting maintenance jobs on their own Mahindra tractor, with plans to post more service videos for fellow Mahindra owners.
You drain it from a hose that runs to the bottom of the radiator and back to the block, not from the radiator itself like a car.
Approximately 5.2 liters or 5.5 quarts, using a 50/50 mix of coolant and deionized water, including the reservoir bottle amount.
Remove the two 10mm bolts holding the tank in place on the back side, then grab the tank and drain it.
A 6mm socket with an extension to loosen the hose clamp, plus two drain pans and gloves since you are working with chemicals.
