Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is an owner's real-world task comparison, not a specs review: three tractors already on hand (Farmall 75A with loader, a track-equipped Kubota M5-091 with fuel trouble, and an older John Deere 1830) are weighed against each other for one specific job, dragging a cedar and seeding a lawn without tearing it up or hitting sprinkler heads. Expect practical reasoning about turning radius, tire/track impact on grass, and reliability, not pricing or detailed mechanical demos. Useful for small-property owners deciding which tractor suits tight-turn, lawn-friendly chores.
Its front loader tires have deep lugs that could tear up the lawn, and the tractor does not turn very sharp, making it hard to avoid sprinkler heads.
It had fuel issues, likely crud in the fuel tank or a plugged fuel filter, causing the engine to die after running only about two minutes.
Its power steering lets it turn very sharply, so the owner can seed without backing up much and avoid over-seeding areas already planted.
| Case IH Farmall 75A | Kubota M5-091 | |
|---|---|---|
| PTO horsepower | 60 hp | 76 hp |
| Loader lift capacity | Not Published | LA1854: 5,501 lb at bucket pivot pin (height position); 6,470 lb at bucket pivot pin (power position) |
| 3-point lift capacity | 5,952 lb (optional hitch 6,614 lb) | 7,055 lb |
| Hydraulic flow | 12.6 gpm | 15.9 gpm |