Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Part two of a two-part fuel filter replacement on a Branson 3725H, picking up where the previous video left off. This installment covers O-ring and filter element swap with thread lubricant, the tight-space strap-wrench challenge, hand-priming the fuel system and bleeding air via the bleeder screw, a first start attempt, and topping off the tank. Useful for owners tackling this specific job themselves, though the pacing is leisurely and the ending drifts into fuel-price commentary.
Pump the primer by hand until you feel resistance and hear gurgling, loosening the bleeder screw on top to let air and a bit of fuel escape before tightening it back down.
The strap wrench gave plenty of grip, but the problem was the tight space available to turn the tool around the filter housing.
The Branson genuine filter element part shown is EA 000052524, and no cross reference for it could be found.