Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner-operator walks through the full seasonal switchover on a Kioti CK2610: removing the piranha tooth bar and loader, then mounting a 66-inch front snowblower via the mid-mount PTO subframe. He covers specific hardware (15/16 wrenches, pin sizes, hydraulic hose color-coding), greasing every fitting before attachment, and troubleshooting a dead PTO caused by a detached linkage. Best for CK2610 owners doing this swap themselves for the first time.
An owner-operator sharing hands-on, learn-as-you-go experience from what appears to be a small farm or berry operation, with no commercial affiliation evident.
Lay the lift feet flat into a notch on the arm, release hydraulic pressure by wiggling the controls, remove the pins, then disconnect the hydraulic lines and back the tractor away.
Match colors: red goes on red, white on white, yellow goes on green, and blue goes on yellow, based on a photo taken from the prior year's setup.
A linkage that connects to the mid-mount PTO controller had come disconnected from its pin; reattaching the pin and washer fixed the problem.
The tooth bar sits five-eighths of an inch lower than the bucket, so removing it lets the loader sit flat instead of at an angle all winter.
