Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a product demo, not a tractor review: Paul and Kathy Short show an aftermarket LED light bracket they designed for the Kubota L6060's BH92 backhoe dipper stick, meant to illuminate dig holes that cab-mounted lights shadow. They walk through installing the quarter-inch bracket, drilling and tapping bolt holes, mounting lights, and wiring a switch. Useful mainly for L6060/backhoe owners considering this specific accessory, not general buyers.
Posted by the Paul & Kathy Short channel, who appear to design and sell aftermarket accessories and credit a Kubota dealer for loaning the tractor, so expect a product-promotional angle rather than independent review.
Cab-mounted lights cast a shadow into the hole while digging, so lights on the dipper stick shine down into the hole as the boom lowers, letting you see what you are doing.
Position the bracket, raise and secure the boom, mark the two bolt hole locations, drill to five-sixteenths, tap with a three-eighths by sixteen threads per inch tap, then bolt on the bracket and mount the lights.
Use a plug such as a waterproof rubber trailer plug at the few wires behind the backhoe, then run a power wire into the cab with a switch to turn the lights on.