Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a static, feature-by-feature walkaround of the TYM T25 rather than a field test, no driving, loader work, or backhoe digging shown. It methodically points out component locations and controls: loader attach/detach, hood and fluid fill points, grease zones, three-point and PTO setup, hydraulic remotes, differential lock, cruise control, and seat adjustments. Best suited for someone wanting to learn where everything is before or after a purchase, not performance impressions.
Posted by the RJM Companies channel, which appears to produce straightforward model walkarounds rather than hands-on field reviews.
Drop the stand to create a three-point connection with the ground, remove the two large pins on each side, then use the front hydraulics to remove the loader from the saddle.
Pull the pin to move the front guard, then pull the black lever next to the parking brake, which will release the hood for access underneath.
The differential lock is located under the seat and on the floor, and it connects both tires together to help get out of thick mud.
Yes, the T-25 comes pre-installed with rear hydraulic remotes, and the red lever brings hydraulic pressure to the back of the system, such as for a backhoe.