Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Mike identifies a specific design flaw on the New Holland TC40 (and Case IH equivalent): the stock seat pools water after rain, soaking the rider. He walks through swapping it for an aftermarket seat with a drain hole and added armrests, covering bolt removal, armrest attachment, and an explanation of normally open vs. normally closed seat safety switches. Worth watching if you own one of these tractors and want a practical how-to, though note Mike sells the replacement seats on his own website.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
The stock vinyl seat has a design flaw where rainwater pools in the seat, accumulating close to a pint of water that soaks through clothing when sat on.
Replace the stock seat with an aftermarket seat that has a drain hole built into the bottom, letting water escape instead of pooling.
A normally open switch has no current until weight closes it, allowing the tractor to start. A normally closed switch has current until pressed, which then breaks the circuit.
Use speed nuts with the flat side facing outside, push the fabric in, and slide the nuts over the mounting points, three on each side.