Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A hands-on install walkthrough showing how to add a third-function diverter valve to a Solis H24 so a grapple can be controlled through the loader's curl circuit. Covers hose removal and rerouting, fitting choices (including a practical note on flat-face vs. standard couplers), wiring the new handle and harness to the battery, and a quick leak check at the end. Best for H24 owners planning the same upgrade.
Remove the factory hoses at the loader curl circuit, install the new valve with its pre-bent metal pipes and fittings, route wiring from the valve and handle to the battery, then check for leaks while cycling the grapple.
The kit includes standard 3/8 thread couplers, but many grapples now use flat-face couplers instead, requiring an adapter like a 1/2 inch body by 3/8 thread fitting.
The H24 shown has about 130 hours over two years and has never needed a shop visit; the owner's upgraded H24 Plus has 50 hours with the same reliability.
Only two physical connections are needed at the battery terminals, a positive and negative, and the harness is fused.