Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a pre-installation prep video, not the actual install, Mike walks through what comes in a diverter valve kit, what doesn't (hoses, quick-connects), how to measure and source the right fittings, and why identifying your existing hydraulic fitting type before ordering saves multiple hardware-store trips. He shares a total parts cost of roughly $636. Best for DIYers planning a diverter valve install who want to avoid common sourcing mistakes.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
The kit includes the valve, brackets to mount it, and some fittings. It does not include the hoses to the front or the quick connect fittings for implements, since hose length varies by tractor.
Mount the valve on the tractor first, then have someone help measure the distance from the block to the front and to the existing tilt and curl lines. Mike needed two 7-foot hoses and two 24-inch hoses.
Mike's total cost for the entire installation, not counting pipe joint cement, was about $636.40. He estimates a dealer would charge around $1,000 to $1,200 or more.
Check what type of fitting is on your existing hydraulic lines before ordering parts. Mike's tractor used JIC flanged fittings instead of 3/8 inch pipe thread, costing him extra trips to the store.