Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A hands-on, step-by-step 50-hour service walkthrough for the RK25 (TYM 25-based) tractor by an owner doing the work himself. Distinctively practical: he names exact tool sizes (14-flute filter wrench, 14mm, 9/16, 7/8), explains the hydraulic-fluid-reading mistake to avoid, covers greasing, belt deflection, brake travel, suction filter swap, and tire pressure. Best for RK25 owners tackling this service themselves for the first time.
When an implement is up in the air, you are not getting a correct reading on your hydraulic fluid, so it should be lowered to the ground before checking.
A 14-flute, 65 to 67 size filter wrench works perfectly on the TYM 25 tractor engine oil filter, used with a 3/8 drive extension and ratchet.
Using a soft touch, brake travel should be somewhere between an inch to an inch and a half; check it every service and watch for consistency.
The suction filter hose clamp takes a 9/32 socket, though a quarter inch, 5/16, or a flathead screwdriver can also work.