Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner-operator working through a real-world frustration: on the Farmall 110C, changing the fuel filters almost requires pulling the loader first because the filters sit directly behind the loader mounts. The video walks through why access is so tight, which hoses and brackets need to move, and how to disconnect the sensor wire clip on the back filter, the step the creator flags as the genuinely hard part. Best for 110C owners facing the same 'water in fuel' or clogged-filter alarm.
Normally yes, since the filters sit right behind the loader mounts, though the creator once changed them with the loader on when the tractor would not start, calling it not fun.
The back filter has a sensor held by a wire clip stuffed down behind other parts, which is described as the hardest part of the whole job to remove.
Remove a front bracket so the hydraulic hoses can flop out of the way, plus another line in front of the filters that may be electrical.