Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A real-time repair walkthrough where Mike and a more mechanically skilled neighbor extract a snapped-off grease zerk from a grapple and install a replacement. The video captures the actual trial-and-error process, trying a screwdriver, easy-outs, measuring threads with a gauge, and ultimately matching the old fitting at a parts store. Useful for anyone facing the same threaded-zerk scenario; Mike briefly notes that pressed-in zerks require a different, more involved approach.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
Try an easy out or a small flat screwdriver to extract the broken piece by hand, since there is usually still thread wall material left in the hole to grip.
Measure the threads with a gauge, then take the old broken zerk to a parts store so staff can match it exactly, since gauges may not give an exact match.
No. A pressed in zerk requires removing what is left, tapping the hole, and installing a new threaded zerk, which is a more involved job.