✦
Overview
An owner-built project video, not a review or dealer walkthrough. The creator retrofitted a weld-on BobTach quick-attach system to an early Branson 1905H that didn't come with one from the factory. He covers pin spacing (33.5 inches to match Bobcat spec), material choices, welding with a small Hobart MIG, the ~75-lb weight penalty and estimated 100-lb lift capacity loss, and a critical tip about leaving a sixteenth-inch float gap on the pin plates. Best for DIYers considering the same retrofit.
Posted by the Tinker Master channel, which appears to be an owner-operator sharing a hands-on fabrication project from their own experience.