Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A short explainer focused entirely on the drawbar, specifically two things most owners overlook: how to slide it out of the way when running three-point implements, and the critical 14-inch PTO-tip-to-drawbar-hole measurement required for 540 RPM implements. No loader work, no specs comparisons, just a quick, practical tip video. Most useful for new tractor owners who didn't know either of these things.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
Pull the pin out, remove the clip, then shove the drawbar back into the tractor and reinstall the pin and clip. It stays available if needed later.
For 540 RPM implements in the US, the distance from the tip of the power takeoff to the center of the drawbar hole needs to be 14 inches.
If the drawbar has multiple holes and the distance is off, it's possible to do damage to your implement or your PTO shaft.