Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A straightforward step-by-step tutorial showing exactly how to remove and reinstall the mower deck on a Bad Boy 1025, filmed on concrete with real hands-on narration. It walks through dropping the deck, pulling the front locking pin, disconnecting the rear PTO collar, driving the tractor off, then reversing the process. No specs or settings discussed, just the mechanical steps. Best for new 1025 owners who haven't done this procedure before.
Drop the deck to the ground, pull the front locking pin, disconnect the rear PTO collar, then drive the tractor forward and off the deck in four-wheel drive low.
The rear PTO has a sleeve collar you pull back with two fingers, then the PTO shaft slides right off.
Drive over the deck, lower the contact point to line up with the slots, line up the splines, push the coupler back and slide it on until it clicks, then hook up the front.