Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is an owner's detailed walkthrough of installing a Land Pride QH20 quick hitch on an L6060, comparing it against the lighter QH16, discussing pin diameters, bushings, vibration washers, PTO driveline angle benefits, and clearance to the tractor's tires and lift arms. He also notes dropping a hydraulic disconnect due to sag. Useful for owners deciding between QH16 vs QH20 or planning their own quick-hitch setup.
The owner chose the QH20 because the QH16's clevis pins were only 1/4 inch steel, too light for his CAT 1 and CAT 2 implements, even though QH20 is about 50 pounds heavier.
Yes, the L6060 has CAT 1 and CAT 2 lower lift arms that fit the pins perfectly, with plenty of clearance from the tires.
Yes, it decreases the driveline angle since the implement sits further back, which the owner says reduced vibration and should help the U-joint last longer.
One hydraulic disconnect on the right lift arm kept bleeding down and sagging during mowing, so the owner switched back to a manual adjusted lift arm.