Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A practical owner-shot walkthrough of removing and reattaching the 320R loader on a 3039R, narrated step by step from the seat and on the ground. Covers the pivot-point locking mechanism, relieving hydraulic pressure before disconnecting hoses, alignment tips for reattachment, and keeping couplers clean. Goes deeper than a quick overview, useful for anyone new to this specific loader/tractor pairing who wants to know the actual sequence before attempting it solo.
Lower the bucket until tires start lifting off the ground, which loosens the pivot points so they flip up, then disconnect the hydraulics after relieving pressure.
Push down on the coupler; if it feels firm and nothing spits out, it is under pressure, meaning you did not relieve it properly before disconnecting.
No, the mounting pads have no pins or attachments to mess with, which makes detaching and storing the loader fast and convenient.
Line up the right-side housing with the support arm on the frame, drive in slowly, let connections fall together, then push forward until tires lift and drop in the spacers.