Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner-operator video focused on one specific task: removing a New Holland 757C backhoe from a TC25D for winter storage in a shed. It walks through blocking the backhoe, pulling the mounting pins, managing the hydraulic hoses, and driving the tractor clear, with honest commentary on tight spaces and real-world messiness. Best for TC25D owners curious about how the backhoe mounts and detaches.
Block the backhoe on wood blocks for frame clearance, pull the mounting pins, lower it down, disconnect the pressure and return hydraulic hoses, then drive the tractor away.
The owner says hooking it up takes about ten or fifteen minutes because the tractor must be pulled in and out a couple times to square it up; removal is similarly quick.
No, the rear only has a small C-channel that hooks into a frame mount, with no pins; pins are only used at the front mounting points.