Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This one covers DIY mods rather than a tractor review: the owner built a step onto the loader bracket's mower-deck mount to help his 82-year-old father climb onto the CS2220 more easily, plus a homemade 3-point weight bracket with a receiver hitch and Toro 55 lb suitcase weights to counterbalance the loader (rated ~1,500 lbs). Useful for owners wanting ballast and accessibility ideas, not spec or performance info.
Posted by the Average Wrench n Ride channel, an owner sharing a hands-on fabrication project done for a family member's tractor.
The owner used an existing bracket for the mower deck on the back of the loader bracket to make a small step, helping his 82-year-old father get onto the machine.
He built a 3-point weight bracket from inch and a half steel with a receiver hitch, using Toro 55 lb suitcase weights plus a 185 lb plate for ballast.
About 1,500 lbs, which makes it hard to maneuver with a full load of dirt without added rear ballast.