Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Sparked by a viewer question about a Kubota loader manual's 10-hour lubrication interval, this video physically pulls the rubber boot off a joystick control, shows the internal linkage and pivot points, explains how moving the lever routes hydraulic flow, then demonstrates cleaning with WD-40 degreaser and lubricating with gel lube. It also draws a clear line between DIY-fixable linkage failures and valve problems best left to a hydraulic shop. Useful for any loader owner who has never touched this maintenance task.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
It likely means 10 hours of loader use, not engine use, since constant engine-hour lubrication would be excessive for most owners who use the loader only occasionally.
WD-40 Specialist industrial strength cleaner and degreaser to clean it first, then WD-40 Specialist gel lube, which does not drip and prevents rust for up to a year.
Linkage components outside the valve can be ordered and fixed yourself, but problems inside the valve, with O-rings and springs, should go to a hydraulic shop.
Moving the lever pushes or pulls a rod into the valve, changing hydraulic oil flow to the top or bottom of the cylinder, which tilts or curls the bucket or moves the boom.