Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A brand-agnostic engine oil change walkthrough built around a vacuum evacuator (Four Uncles brand), with specific technique tips like warming the engine first, adding only 80% of capacity before starting, and cleaning the filter area with brake cleaner. The back half pivots to a solid oil-selection primer: API ratings, diesel vs. gasoline classifications, and viscosity grades mapped to climate ranges including cold Canadian winters. Best for newer tractor owners wanting both the how-to and the why.
Warm the engine, insert the matching hose through the dipstick tube into the oil pan, connect it to the evacuator, and use an air compressor or hand pump to suck the oil out.
Check your manual for the full capacity with a filter change, then add only about 80 percent, start the engine to fill the filter, let it sit, and take a final reading.
For colder climates like Maine or Canada, a zero W50 or zero W20 would likely be the proper choice for cold weather protection.
No, each oil brand carries an API standard sticker showing it has been tested to that standard, so using the correct standard and changing oil on time matters more than brand.