Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Tony walks through loading rear tractor tires with windshield washer fluid as a budget alternative to rim guard, detailing the specific tools needed (a ~$12 air-water adapter, a small pump, valve stem remover) and the step-by-step process at a real-time, hands-on pace. He also documents a bead-breaking mistake mid-job and how he recovered, which makes this useful for DIYers who want an honest look at what can go wrong.
You need a bucket, a pump, a water adapter, a couple of short water hoses, and a valve stem remover.
Jack up the rear wheel, rotate the valve stem to the 12 o'clock position, let the jack down to put weight back on the wheel, then remove the valve stem.
Letting the jack down to compress the tire can break the bead loose from the rim, especially with stiff sidewalls like Carlisle Track Chief tires, causing air leaks.
Put a ratchet strap around the tire to apply pressure while someone adds air through the valve to help the bead pop back onto the rim.