Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on how-to for owners doing their own mower deck service on a Kubota BX2360: removing the deck (PTO, rear links, front link), sharpening and balancing the blades, and reinstalling them with correct washer order, then greasing roughly eight or nine deck grease points including the tension pulley pivot, spindles, and PTO spline. It's a task-focused walkthrough, not a tractor review, best suited to current owners doing routine maintenance.
Posted by the Practical Diy For the Capable Homeowner channel, which appears to be an owner sharing personal how-to maintenance videos rather than a dealer or reviewer.
Lower the deck, shut off the tractor, disconnect the PTO coupler, pull the rear link L pins and lock them, remove the front link, then raise the rear links to the highest position.
A 30 mm socket or wrench loosens the blade bolts.
Install with the bottom side of the blade facing you, put the cup washer on first with its raised side facing you, then add the lock washer and tighten well.
About eight or nine, not counting the wheels, including the tension pulley pivot, three spindles, both ends of the universal joint, and the PTO spline.
