Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This isn't an install walkthrough but a post-install overview from an MX5400 owner clarifying hose and wiring routing after already running the Land Pride third function valve kit for over 140 hours. It shows which loader fitting to disconnect, where the new valve housing mounts, how the joystick electronics connect via a factory dummy plug, and Pioneer coupler placement. Best for owners already mid-install who need specific connection points clarified, not a full step-by-step guide.
Posted by an owner-operator (self-described non-expert who "just knows how to wrench") sharing hands-on experience from using the tractor and attachment on their own property.
Only the feed hose closest to the hood needs removal. Leave the elbow in place and route the new hose down into the pump.
No cutting or splicing is needed. The factory harness had a watertight dummy plug that gets removed and replaced with the kit's power line.
Over 140 hours, including rough terrain work building a motocross track, with no leaks reported.
It mounts right below where the loader joystick is mounted, after removing two bolts, and slips up underneath.
