Across 8 measurable specs, this matchup is a dead heat: 3 categories to the Bobcat CT4050, 3 to the Kioti DK5020, 2 tied. Machine pages: Bobcat CT4050 and Kioti DK5020 .
Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.
Category Verdict Spec Bobcat CT4050 Kioti DK5020 Engine HP (hp) 50.3 hp 50.3 hp PTO HP (hp) 39.3 hp ▲ 41.5 hpLoader Lift (lb) 1,795 lb ▲ 2,474 lb3-Pt Lift (24 in) (lb) 2,716 lb 2,716 lb Lift Height (in) 104.6 in ▲ 107.7 inBreakout Force (lbf) ▲ 4,136 lbf3,895 lbf Hydraulic Flow (gpm) ▲ 16.5 gpm14.6 gpm Travel Speed (mph) ▲ 18.5 mph16.7 mph
Overview Loader Work PTO Work
The headline numbers at a glance.
Bobcat CT4050 Kioti DK5020
ITCUSA.COM ITCUSA.COM ITCUSA.COM
Full Spec Sheet Every published spec, side by side, including the details the graphs above don't chart.
Spec Bobcat CT4050 Kioti DK5020
▶ EnginePTO Power 39.3 hp 41.5 hp Alternator alternator Not Published Air Cleaner Dry type, replaceable Not Published Engine Type diesel Diesel, 4-cycle, water-cooled engine Fuel System Common Rail Direct Injection (CRDI) Not Published Displacement 111.4 in³ 111.4 in³ Engine Model 3FT-THL4-U — No. of Cylinders 3 3 Rated Engine Speed 2600 rpm 2600 rpm Cooling System Type water cooled Water-cooled Engine Manufacturer Daedong KIOTI (Daedong) Engine Power (Gross) 50.3 hp 50.3 hp Engine Emissions Constraints Tier 4 Not Published ▶ WeightWeight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Applicable Not Published ▶ WarrantyWarranty Length & Coverage 24 months / 1,500 hours (whichever occurs first) Limited: Tractors (Non-Commercial Application) 24 months parts & labor; Extended (driveline): 48 months parts & labor ▶ HydraulicsPump Type 36.40 Gear Steering Flow 4.94 gpm 18.7 lpm 4.94 gpm Implement Flow 9.62 gpm 36.4 lpm 9.62 gpm Total Hydraulic Flow 16.5 gpm [HST] / 16.5 gpm [SST] 14.56 gpm Hydraulic System Type open center Not Published Rear Remote Hydraulic Flow 36.40 Not Published Overall Hydraulic Pump Flow 16.5 gpm [HST] / 16.5 gpm [SST] 14.56 gpm No. of Optional Remote Valves 2nd Pair Opt [HST] / 2 Pairs Opt [SST] 2 (optional) No. of Standard Remote Valves 1 Pair Std (2nd Pair Opt) [HST] / Opt 2 Pairs [SST] Not Published ▶ PTO & HitchPTO Rear 540 rpm 540 rpm PTO Type Independent Independent Lift Control Type Hydraulic Position Control System Position Hitch Lift Capacity 2716 lb. 2,998 lb Mid-PTO Availability Optional: 2119 rpm [HST] / - [SST] 2,000 rpm Category, 3-Point Hitch Category 1 Category I Hitch Lift Capacity (at 24”) 2,716 lb 2,716 lb ▶ Tire OptionsR3 Turf - Rear 44x18.0-20 R3 5.7 gal-16.1 R3 Turf - Front 29x12.5-15NHS R3 29X12.5-15 Tire Size & Options Not Published R1 Agricultural; R3 Turf; R4 Industrial R4 Industrial - Rear 4.6 gal-24 R4 14.9-24 R4 Industrial - Front 10-16.5 (124 A2) 10-16.5 R1 Agricultural - Rear 13.6-24 13.6-24 R1 Agricultural - Front 8-16 8.0-16 ▶ Fluid CapacityCoolant Capacity 0.9 gal 0.89 gal (engine only) Crankcase Capacity 2 gal 1.95 gal Fuel Tank Capacity 11.9 gal 11.9 gal Front Axle Fluid Capacity 1.5 gal 1.48 gal Transmission / Hydraulic System Capacity 11.4 gal 11.4 gal ▶ Loader & AttachmentsLoader Model FL9 — Loader Lift Height 104.6 in. 107.7 in (to pivot pin) Loader Breakout Force 4136 lb. 3,895 lb (at pivot pins) Quick Attach Loader System Standard Quick Attach Mounting System Quick attach (QA) bucket Loader Lift Capacity (Full Height) 1795 lb. 2,474 lb @ 59.84 in pivot pin height ▶ Transmission & DrivetrainClutch Standard Dry Single Stage No. of Speeds 8F X 8R [SST] 8F/8R Transmission Type 3-Range HST [HST] / 8F X 8R Synchro [SST] Synchronized Shuttle Max Travel Speed (Forward) 18.5 mph (29.7 km/hr.) [HST] / 17.5 mph (28.2 km/hr.) [SST] 16.71 mph Max Travel Speed (Reverse) 12.9 mph (20.8 km/hr.) [HST] / 17.1 mph (27.5 km/hr.) [SST] 16.28 mph Differential Lock & Limited Slip Options Std Rear differential lock (standard) ▶ Chassis, Steering & ControlsBrakes Wet Multi-disc Wet Disc Type Steering Hydrostatic Power Steering Hydraulic Power Steering Frame Type Not Published Not Published Front Axle Type Hydraulic multi disc Clutch Mechanical 4WD Drawbar Capacity 750.00 KG 1,655 lb (Vertical Load) Front Axle Rating Not Published Not Published Seat Suspension & Adjustability Std Not Published ▶ Dimensions & ManeuverabilityWheelbase 71.2 in. 71.3 in Overall Width Ag Tires: 67.0 in. / Industrial Tires: 69.8 in. / Turf Tires: 72.2 in. 62.8 in Ground Clearance 15.3 in. 14.5 in Height to Top of ROPS 97.4 in. 96.8 in Height to Top of Cab Model Not Applicable Not Published Height to Top of ROPS (folded) Not Published Not Published Min. Turn Radius without Brakes 103.5 in. Not Published Overall Length with 3-Point Hitch 125.5 in. 124.3 in ▶ ITC Company AccessoriesAccessories that fit
Bobcat CT4050 vs Kioti DK5020: Quick Answers
Which has more horsepower, the Bobcat CT4050 or the Kioti DK5020? They are effectively tied: both machines are rated at 50.3 hp hp for engine hp.
Which has more PTO horsepower, the Bobcat CT4050 or the Kioti DK5020? The Kioti DK5020 leads on pto hp at 41.5 hp hp, compared to 39.3 hp hp for the Bobcat CT4050.
Which has more loader lift capacity, the Bobcat CT4050 or the Kioti DK5020? The Kioti DK5020 leads on loader lift at 2,474 lb lb, compared to 1,795 lb lb for the Bobcat CT4050.
Which has more three-point hitch lift capacity, the Bobcat CT4050 or the Kioti DK5020? They are effectively tied: both machines are rated at 2,716 lb lb for 3-pt lift (24 in). More Head-to-Heads