Across 6 measurable specs, this matchup is a dead heat: 3 categories to the Case IH Farmall 55A, 3 to the Case IH Farmall 65C. Machine pages: Case IH Farmall 55A and Case IH Farmall 65C .
Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.
Category Verdict Spec Case IH Farmall 55A Case IH Farmall 65C Engine HP (hp) 54 hp ▲ 64 hpPTO HP (hp) 43 hp ▲ 50 hpLoader Lift (lb) 1,828 lb ▲ 2,734 lb3-Pt Lift (24 in) (lb) ▲ 4,299 lb3,664 lb Lift Height (in) ▲ 120 in105 in Breakout Force (lbf) — 3,527 lbf Hydraulic Flow (gpm) ▲ 12.6 gpm12.5 gpm
Overview Loader Work PTO Work
The headline numbers at a glance.
Case IH Farmall 55A Case IH Farmall 65C
ITCUSA.COM ITCUSA.COM ITCUSA.COM
Share ↗ Share Copy link ↓ Image 𝕏 f ✉ Save to my research Full Spec Sheet Every published spec, side by side, including the details the graphs above don't chart.
Spec Case IH Farmall 55A Case IH Farmall 65C
▶ EnginePTO Power 43 hp 50 hp Alternator Not Published Not Published Air Cleaner Not Published Not Published Engine Type Diesel, turbocharged Diesel, turbocharged Fuel System Electronic high-pressure common rail Not Published Displacement 177 in³ 207.5 in³ No. of Cylinders 3 4 Rated Engine Speed 2300 rpm 2300 rpm Cooling System Type Not Published Not Published Engine Manufacturer FPT Industrial FPT Industrial Engine Power (Gross) 54 hp 64 hp Engine Emissions Constraints Tier 4 Tier 4 ▶ WeightWeight with ROPS and Loader Not Published Not Applicable Weight with Cab and Loader Not Applicable Not Published ▶ WarrantyWarranty Length & Coverage Not Published Not Published ▶ HydraulicsPump Type Not Published Not Published Steering Flow Not Published Not Published Implement Flow 12.6 gpm 12.5 gpm Total Hydraulic Flow Not Published Not Published Hydraulic System Type Open center Open center Rear Remote Hydraulic Flow Not Published 2 standard / 3 optional Overall Hydraulic Pump Flow Not Published Not Published No. of Optional Remote Valves 3 3 No. of Standard Remote Valves 2 2 ▶ PTO & HitchPTO Rear 540 rpm standard; optional 540/540E 540 rpm (standard) / 540/540E rpm (optional) PTO Type Not Published Not Published Lift Control Type Mechanical Draft Control (MDC), top link sensing Mechanical draft control (MDC) top link sensing Hitch Lift Capacity 4,299 lb @ 24 in behind pin (optional 4,740 lb) 3,664 lb @ 24 in behind pin Mid-PTO Availability Not Published Not Published Category, 3-Point Hitch Category 1/2 Category I/II Hitch Lift Capacity (at 24”) 4,299 lb @ 24 in behind pin 3,664 lb @ 24 in behind pin ▶ Tire OptionsR3 Turf - Rear Not Published Not Published R3 Turf - Front Not Published Not Published Tire Size & Options Not Published Not Published R4 Industrial - Rear Not Published Not Published R4 Industrial - Front Not Published Not Published R1 Agricultural - Rear Not Published Not Published R1 Agricultural - Front Not Published Not Published ▶ Fluid CapacityCoolant Capacity Not Published Not Published Crankcase Capacity Not Published Not Published Fuel Tank Capacity 21.7 gal 23.8 gal Front Axle Fluid Capacity Not Published Not Published Transmission / Hydraulic System Capacity Not Published Not Published ▶ Loader & AttachmentsLoader Lift Height 120 in (L610 max height under level bucket) 105 in Loader Breakout Force Not Published 3,527 lb Quick Attach Loader System Not Published Compatible with L565 loader Loader Lift Capacity (Full Height) Up to 1,828 lb NSL or 3,153 lb MSL @ 31.5 in forward of pivot pin 2,734 lb ▶ Transmission & DrivetrainClutch Dry clutch (8x8); wet clutch (12x12 power shuttle) Wet clutch No. of Speeds 8 forward / 8 reverse (optional 12 forward / 12 reverse; creeper ready) 12 forward / 12 reverse Transmission Type 8x8 mechanical shuttle (dry clutch); optional 12x12 power shuttle (wet clutch) or 12x12 with creeper 12x12 Power shuttle (wet clutch) Max Travel Speed (Forward) Not Published Not Published Max Travel Speed (Reverse) Not Published Not Published Differential Lock & Limited Slip Options Mechanical differential lock; limited-slip front axle (MFD) Mechanical ▶ Chassis, Steering & ControlsBrakes Not Published Not Published Steering Not Published Not Published Frame Type Not Published Utility chassis (cab, MFD) Front Axle Type 2WD or MFD with limited slip MFD with limited slip Drawbar Capacity Not Published Not Published Front Axle Rating Not Published Not Published Seat Suspension & Adjustability Not Published Not Published ▶ Dimensions & ManeuverabilityWheelbase 81.2 in 2WD; 81.8 in MFD 84 in Overall Width Not Published Not Published Ground Clearance Not Published Not Published Height to Top of ROPS 100 in (top of cab, MFD) Not Applicable Height to Top of Cab Model 6,834 lb MFD w/o ballast (cab); 6,173 lb 2WD w/o ballast (cab) 98 in Height to Top of ROPS (folded) Not Applicable Not Applicable Min. Turn Radius without Brakes Not Published Not Published Overall Length with 3-Point Hitch 151.8 in 151.8 in
Case IH Farmall 55A vs Case IH Farmall 65C: Quick Answers
Which has more horsepower, the Case IH Farmall 55A or the Case IH Farmall 65C? The Case IH Farmall 65C leads on engine hp at 64 hp hp, compared to 54 hp hp for the Case IH Farmall 55A.
Which has more PTO horsepower, the Case IH Farmall 55A or the Case IH Farmall 65C? The Case IH Farmall 65C leads on pto hp at 50 hp hp, compared to 43 hp hp for the Case IH Farmall 55A.
Which has more loader lift capacity, the Case IH Farmall 55A or the Case IH Farmall 65C? The Case IH Farmall 65C leads on loader lift at 2,734 lb lb, compared to 1,828 lb lb for the Case IH Farmall 55A.
Which has more three-point hitch lift capacity, the Case IH Farmall 55A or the Case IH Farmall 65C? The Case IH Farmall 55A leads on 3-pt lift (24 in) at 4,299 lb lb, compared to 3,664 lb lb for the Case IH Farmall 65C. More Head-to-Heads
