John Deere 2210 vs John Deere 3025E

Every published spec for both machines, side by side. The verdict below is computed straight from the spec sheets, not opinion.

Across 8 measurable specs, the John Deere 3025E leads 7 categories to 1. Machine pages: John Deere 2210 and John Deere 3025E.

Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.

Category Verdict

Spec	John Deere 2210	John Deere 3025E
Engine HP (hp)	23 hp	▲ 24.4 hp
PTO HP (hp)	▲ 17.7 hp	17.4 hp
Weight (lb)	1,400 lb	▲ 2,266 lb
Loader Lift (lb)	622 lb	▲ 1,186 lb
3-Pt Lift (24 in) (lb)	701 lb	▲ 1,356 lb
Lift Height (in)	68.5 in	▲ 84 in
Breakout Force (lbf)	1,577 lbf	▲ 1,704 lbf
Hydraulic Flow (gpm)	5.5 gpm	▲ 9.3 gpm
Travel Speed (mph)	8.4 mph	n/a

The headline numbers at a glance.

John Deere 2210John Deere 3025E

Engine HPhp

23 hp

▲24.4 hp

PTO HPhp

▲17.7 hp

17.4 hp

Weightlb

1,400 lb

▲2,266 lb

Loader Liftlb

622 lb

▲1,186 lb

3-Pt Lift (24 in)lb

701 lb

▲1,356 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	John Deere2210	John Deere3025E


Engine Manufacturer	Yanmar	Yanmar
Engine Model	3TNE74	3TNV88F-EPJT2
Engine Type	3-cylinder liquid-cooled diesel, indirect injection	Diesel, naturally aspirated, direct injection
No. of Cylinders	3	3
Displacement	61.4 in³	95.7 in³
Rated Engine Speed	3000 rpm	2400 rpm
Engine Power (Gross)	23 hp	24.4 hp
PTO Power	17.7 hp	17.4 hp
Engine Emissions Constraints	Not Published	Tier 4
Cooling System Type	Liquid-cooled	Water pump
Air Cleaner	Dry type with safety element	Dry type with safety element
Fuel System	Indirect injection, in-line fuel pump with solenoid shutoff	Direct injection
Alternator	20 A	55 A, 12 V

Pump Type	Not Published	Implement/steering pump: Tandem gear; hydrostatic pump: PV axial piston
Implement Flow	3 gpm	5.3 gpm
Steering Flow	2.5 gpm	4.0 gpm
Total Hydraulic Flow	5.5 gpm	9.3 gpm
Overall Hydraulic Pump Flow	5.5 gpm	9.3 gpm
Hydraulic System Type	Not Published	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	Not Published	Not Published
No. of Optional Remote Valves	Not Published	Up to 2 (optional)

Fuel Tank Capacity	5.0 gal	7.5 gal
Coolant Capacity	3.2 qt	1.3 gal
Crankcase Capacity	2.2 qt	4.5 qt
Transmission / Hydraulic System Capacity	3.4 gal	5.5 gal
Front Axle Fluid Capacity	2.6 qt	1.0 gal

PTO Type	Independent, wet disk clutch	Not Published
PTO Rear	540 rpm	540 rpm
Mid-PTO Availability	Standard, 2100 rpm	Not Published
Category, 3-Point Hitch	Category 1	Category I
Hitch Lift Capacity	Not Published	1,356 lb @ 24 in behind link arms
Hitch Lift Capacity (at 24”)	701 lb	1356 lb
Lift Control Type	Not Published	Not Published

Transmission Type	2-range hydrostatic	Hydrostatic transmission (HST)
No. of Speeds	Infinite forward and reverse, 2 ranges	Not Published
Max Travel Speed (Forward)	8.4 mph	Not Published
Max Travel Speed (Reverse)	6.3 mph	Not Published
Clutch	Not Published	Not Published
Differential Lock & Limited Slip Options	Not Published	Not Published

Frame Type	Two-post fixed ROPS; four-wheel drive	Open operator station (OOS)
Steering	Power steering	Hydrostatic
Brakes	Wet disk	Wet disc
Seat Suspension & Adjustability	Not Published	Not Published
Front Axle Type	Mechanical front wheel drive (MFWD), standard, all ranges, engages on the go	4WD (MFWD)
Front Axle Rating	3120 lb	1760 lb
Drawbar Capacity	562 lb	880 lb

Overall Length with 3-Point Hitch	104.3 in	115.9 in
Overall Width	47.2 in	56.9 in (min. rear tread, standard R1 tires); 61.7 in (max. rear tread, larger R4 tires)
Wheelbase	57.1 in	62.8 in
Ground Clearance	7.7 in (front axle)	12.7 in (R4 tires)
Min. Turn Radius without Brakes	88.6 in (MFWD off)	9.4 ft (2.9 m)
Height to Top of ROPS	77.6 in	95.3 in
Height to Top of ROPS (folded)	Not Published	Not Published
Height to Top of Cab Model	Not Published	Not Published

Tractor Weight (Base)	1400 lb	2266 lb
Weight with ROPS and Loader	Not Published	2972 lb
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	18x8.5-10 front and 26x12.00-12 rear; R1 standard, R3 optional	R1 Bar, R3 Turf, R4 Industrial
R1 Agricultural - Front	18x8.5-10	7-14
R1 Agricultural - Rear	26x12.00-12	11.2-24
R3 Turf - Front	18x8.5-10	27X8.50-15
R3 Turf - Rear	26x12.00-12	41X14-20
R4 Industrial - Front	18x8.50-10	25X8.50-14 or 27X8.50-15
R4 Industrial - Rear	26x12.00-12	15.00-19.5 or 43X16-20

Quick Attach Loader System	Not Published	Quick-change attachment carrier
Loader Model	210	D160
Loader Lift Height	210: 68.5 in	84 in
Loader Lift Capacity (Full Height)	210: 622 lb (to max height at pivot point)	1,186 lb
Loader Breakout Force	210: 1577 lbf (at pivot point)	1,704 lb

Warranty Length & Coverage	Not Published	6-year/2,000-hour powertrain; 2-year/2,000-hour basic (full machine)

Find a John Deere dealer near you

John Deere 2210 vs John Deere 3025E: Quick Answers

Which has more horsepower, the John Deere 2210 or the John Deere 3025E?: The John Deere 3025E leads on engine hp at 24.4 hp hp, compared to 23 hp hp for the John Deere 2210.
Which has more PTO horsepower, the John Deere 2210 or the John Deere 3025E?: The John Deere 2210 leads on pto hp at 17.7 hp hp, compared to 17.4 hp hp for the John Deere 3025E.
Which is heavier, the John Deere 2210 or the John Deere 3025E?: The John Deere 3025E leads on weight at 2,266 lb lb, compared to 1,400 lb lb for the John Deere 2210.
Which has more loader lift capacity, the John Deere 2210 or the John Deere 3025E?: The John Deere 3025E leads on loader lift at 1,186 lb lb, compared to 622 lb lb for the John Deere 2210.
Which has more three-point hitch lift capacity, the John Deere 2210 or the John Deere 3025E?: The John Deere 3025E leads on 3-pt lift (24 in) at 1,356 lb lb, compared to 701 lb lb for the John Deere 2210.

More Head-to-Heads

Category Verdict

Spec	John Deere 2210	John Deere 3025E
Engine HP (hp)	23 hp	▲ 24.4 hp
PTO HP (hp)	▲ 17.7 hp	17.4 hp
Weight (lb)	1,400 lb	▲ 2,266 lb
Loader Lift (lb)	622 lb	▲ 1,186 lb
3-Pt Lift (24 in) (lb)	701 lb	▲ 1,356 lb
Lift Height (in)	68.5 in	▲ 84 in
Breakout Force (lbf)	1,577 lbf	▲ 1,704 lbf
Hydraulic Flow (gpm)	5.5 gpm	▲ 9.3 gpm
Travel Speed (mph)	8.4 mph	n/a

The headline numbers at a glance.

John Deere 2210John Deere 3025E

Engine HPhp

23 hp

▲24.4 hp

PTO HPhp

▲17.7 hp

17.4 hp

Weightlb

1,400 lb

▲2,266 lb

Loader Liftlb

622 lb

▲1,186 lb

3-Pt Lift (24 in)lb

701 lb

▲1,356 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	John Deere2210	John Deere3025E


Engine Manufacturer	Yanmar	Yanmar
Engine Model	3TNE74	3TNV88F-EPJT2
Engine Type	3-cylinder liquid-cooled diesel, indirect injection	Diesel, naturally aspirated, direct injection
No. of Cylinders	3	3
Displacement	61.4 in³	95.7 in³
Rated Engine Speed	3000 rpm	2400 rpm
Engine Power (Gross)	23 hp	24.4 hp
PTO Power	17.7 hp	17.4 hp
Engine Emissions Constraints	Not Published	Tier 4
Cooling System Type	Liquid-cooled	Water pump
Air Cleaner	Dry type with safety element	Dry type with safety element
Fuel System	Indirect injection, in-line fuel pump with solenoid shutoff	Direct injection
Alternator	20 A	55 A, 12 V

Pump Type	Not Published	Implement/steering pump: Tandem gear; hydrostatic pump: PV axial piston
Implement Flow	3 gpm	5.3 gpm
Steering Flow	2.5 gpm	4.0 gpm
Total Hydraulic Flow	5.5 gpm	9.3 gpm
Overall Hydraulic Pump Flow	5.5 gpm	9.3 gpm
Hydraulic System Type	Not Published	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	Not Published	Not Published
No. of Optional Remote Valves	Not Published	Up to 2 (optional)

Fuel Tank Capacity	5.0 gal	7.5 gal
Coolant Capacity	3.2 qt	1.3 gal
Crankcase Capacity	2.2 qt	4.5 qt
Transmission / Hydraulic System Capacity	3.4 gal	5.5 gal
Front Axle Fluid Capacity	2.6 qt	1.0 gal

PTO Type	Independent, wet disk clutch	Not Published
PTO Rear	540 rpm	540 rpm
Mid-PTO Availability	Standard, 2100 rpm	Not Published
Category, 3-Point Hitch	Category 1	Category I
Hitch Lift Capacity	Not Published	1,356 lb @ 24 in behind link arms
Hitch Lift Capacity (at 24”)	701 lb	1356 lb
Lift Control Type	Not Published	Not Published

Transmission Type	2-range hydrostatic	Hydrostatic transmission (HST)
No. of Speeds	Infinite forward and reverse, 2 ranges	Not Published
Max Travel Speed (Forward)	8.4 mph	Not Published
Max Travel Speed (Reverse)	6.3 mph	Not Published
Clutch	Not Published	Not Published
Differential Lock & Limited Slip Options	Not Published	Not Published

Frame Type	Two-post fixed ROPS; four-wheel drive	Open operator station (OOS)
Steering	Power steering	Hydrostatic
Brakes	Wet disk	Wet disc
Seat Suspension & Adjustability	Not Published	Not Published
Front Axle Type	Mechanical front wheel drive (MFWD), standard, all ranges, engages on the go	4WD (MFWD)
Front Axle Rating	3120 lb	1760 lb
Drawbar Capacity	562 lb	880 lb

Overall Length with 3-Point Hitch	104.3 in	115.9 in
Overall Width	47.2 in	56.9 in (min. rear tread, standard R1 tires); 61.7 in (max. rear tread, larger R4 tires)
Wheelbase	57.1 in	62.8 in
Ground Clearance	7.7 in (front axle)	12.7 in (R4 tires)
Min. Turn Radius without Brakes	88.6 in (MFWD off)	9.4 ft (2.9 m)
Height to Top of ROPS	77.6 in	95.3 in
Height to Top of ROPS (folded)	Not Published	Not Published
Height to Top of Cab Model	Not Published	Not Published

Tractor Weight (Base)	1400 lb	2266 lb
Weight with ROPS and Loader	Not Published	2972 lb
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	18x8.5-10 front and 26x12.00-12 rear; R1 standard, R3 optional	R1 Bar, R3 Turf, R4 Industrial
R1 Agricultural - Front	18x8.5-10	7-14
R1 Agricultural - Rear	26x12.00-12	11.2-24
R3 Turf - Front	18x8.5-10	27X8.50-15
R3 Turf - Rear	26x12.00-12	41X14-20
R4 Industrial - Front	18x8.50-10	25X8.50-14 or 27X8.50-15
R4 Industrial - Rear	26x12.00-12	15.00-19.5 or 43X16-20

Quick Attach Loader System	Not Published	Quick-change attachment carrier
Loader Model	210	D160
Loader Lift Height	210: 68.5 in	84 in
Loader Lift Capacity (Full Height)	210: 622 lb (to max height at pivot point)	1,186 lb
Loader Breakout Force	210: 1577 lbf (at pivot point)	1,704 lb

Warranty Length & Coverage	Not Published	6-year/2,000-hour powertrain; 2-year/2,000-hour basic (full machine)

Find a John Deere dealer near you

John Deere 2210 vs John Deere 3025E: Quick Answers

Which has more horsepower, the John Deere 2210 or the John Deere 3025E?

The John Deere 3025E leads on engine hp at 24.4 hp hp, compared to 23 hp hp for the John Deere 2210.

Which has more PTO horsepower, the John Deere 2210 or the John Deere 3025E?

The John Deere 2210 leads on pto hp at 17.7 hp hp, compared to 17.4 hp hp for the John Deere 3025E.

Which is heavier, the John Deere 2210 or the John Deere 3025E?

The John Deere 3025E leads on weight at 2,266 lb lb, compared to 1,400 lb lb for the John Deere 2210.

Which has more loader lift capacity, the John Deere 2210 or the John Deere 3025E?

The John Deere 3025E leads on loader lift at 1,186 lb lb, compared to 622 lb lb for the John Deere 2210.

Which has more three-point hitch lift capacity, the John Deere 2210 or the John Deere 3025E?

The John Deere 3025E leads on 3-pt lift (24 in) at 1,356 lb lb, compared to 701 lb lb for the John Deere 2210.

John Deere 2210 vs John Deere 3025E

Category Verdict

Full Spec Sheet

John Deere 2210 vs John Deere 3025E: Quick Answers

More Head-to-Heads

More in the resource center

Look up a tractor

Side-by-side comparison

The Netflix of tractor videos

Tractor guides and articles

John Deere 2210 vs John Deere 3025E

Category Verdict

Full Spec Sheet

John Deere 2210 vs John Deere 3025E: Quick Answers

More Head-to-Heads