John Deere 2520 vs Mahindra Max 26XLT

Every published spec for both machines, side by side. The verdict below is computed straight from the spec sheets, not opinion.

Across 8 measurable specs, the Mahindra Max 26XLT leads 5 categories to 3. Machine pages: John Deere 2520 and Mahindra Max 26XLT.

Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.

Category Verdict

Spec	John Deere 2520	Mahindra Max 26XLT
Engine HP (hp)	▲ 26.5 hp	25.9 hp
PTO HP (hp)	▲ 20.5 hp	20.2 hp
Weight (lb)	1,865 lb	▲ 1,973 lb
Loader Lift (lb)	800 lb	▲ 1,402 lb
3-Pt Lift (24 in) (lb)	1,150 lb	▲ 2,315 lb
Lift Height (in)	78.5 in	▲ 82.7 in
Breakout Force (lbf)	2,239 lbf	▲ 2,690 lbf
Hydraulic Flow (gpm)	▲ 10.5 gpm	8.5 gpm
Travel Speed (mph)	13 mph	n/a

The headline numbers at a glance.

John Deere 2520Mahindra Max 26XLT

Engine HPhp

▲26.5 hp

25.9 hp

PTO HPhp

▲20.5 hp

20.2 hp

Weightlb

1,865 lb

▲1,973 lb

Loader Liftlb

800 lb

▲1,402 lb

3-Pt Lift (24 in)lb

1,150 lb

▲2,315 lb

at pin

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	John Deere2520	MahindraMax 26XLT


Engine Manufacturer	Yanmar	Mitsubishi
Engine Model	3TNV82A-BMJK	S3L2
Engine Type	3-cylinder liquid-cooled diesel	Four-stroke, naturally aspirated, indirect injection, water-cooled diesel
No. of Cylinders	3	3
Displacement	81.2 in³	80.4 in³
Rated Engine Speed	2600 rpm	2500 rpm
Engine Power (Gross)	26.5 hp	25.9 hp
PTO Power	20.5 hp	20.2 hp
Engine Emissions Constraints	Not Published	Not Published
Cooling System Type	Liquid-cooled	Water Cooled
Air Cleaner	Dry type, two stage	Not Published
Fuel System	Not Published	Indirect Injection
Alternator	20 A	50 A, 12 V

Pump Type	Not Published	Not Published
Implement Flow	5.0 gpm	5.8 gpm
Steering Flow	5.5 gpm	Not Published
Total Hydraulic Flow	10.5 gpm	8.5 gpm
Overall Hydraulic Pump Flow	10.5 gpm	8.5 gpm
Hydraulic System Type	Not Published	Open Center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	2	Not Published
No. of Optional Remote Valves	Not Published	Not Published

Fuel Tank Capacity	7.1 gal	6.1 gal
Coolant Capacity	4.1 qt	Not Published
Crankcase Capacity	3.0 qt	Not Published
Transmission / Hydraulic System Capacity	3.9 gal	Not Published
Front Axle Fluid Capacity	3.6 qt	Not Published

PTO Type	Independent	Live
PTO Rear	540 rpm (rear PTO standard)	540 @ 2376 rpm
Mid-PTO Availability	Standard	Optional; 2000 @ 2526 rpm
Category, 3-Point Hitch	Category 1	CAT I
Hitch Lift Capacity	1,433 lb	2,315 lb
Hitch Lift Capacity (at 24”)	1,150 lb	Not Published
Lift Control Type	Position control	Not Published

Transmission Type	2-range hydrostatic	HST - 2 ranges
No. of Speeds	Infinite forward and reverse, 2 ranges	Infinite
Max Travel Speed (Forward)	13.0 mph	Not Published
Max Travel Speed (Reverse)	13.0 mph	Not Published
Clutch	Not Published	Dry - Single
Differential Lock & Limited Slip Options	Not Published	Not Published

Frame Type	Folding ROPS standard	Not Published
Steering	Power steering	Power Steering
Brakes	Wet disk	Wet disc
Seat Suspension & Adjustability	Not Published	Not Published
Front Axle Type	MFWD, standard, all ranges, on-the-go engagement	Not Published
Front Axle Rating	1,940 lb	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Width	51.0 in (minimum, standard tires)	54.3 in
Wheelbase	65.2 in	63.2 in
Ground Clearance	13 in (front axle); 11 in (rear axle drawbar)	11.4 in
Min. Turn Radius without Brakes	8.2 ft	7.2 ft
Height to Top of ROPS	90 in	84.3 in
Height to Top of ROPS (folded)	68.9 in	Not Published
Height to Top of Cab Model	Not Published	Not Published
Overall Length	108.9 in (with 3-point hitch)	110 in

Tractor Weight (Base)	1,865 lb (with all fluids)	1,973 lb
Weight with ROPS and Loader	Not Published	2,600 lb (1,973 + 627, computed; MXLT6.9 gal loader shipping weight)
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	R3 turf standard (24x8.5-14 front, 36x14.00-15 rear); R4 industrial optional (23x8.5-12 front, 14-17.5 rear)	Ag, Industrial, Turf
R1 Agricultural - Front	Not Published	7-12
R1 Agricultural - Rear	Not Published	9.5-16
R3 Turf - Front	24x8.5-14	23x8.5-12
R3 Turf - Rear	36x14.00-15	33x12.5-15
R4 Industrial - Front	23x8.5-12	23x8.50-12
R4 Industrial - Rear	14-17.5	12-16.5

Quick Attach Loader System	Tool-free attach-and-park mounting; 200CX attaches and detaches in under 3 minutes	Quick-Attach Adapter (included)
Loader Model	200X; 200CX	MXLT26L
Loader Lift Height	200CX: 78.5 in	82.7 in
Loader Lift Capacity (Full Height)	200CX: 800 lb (at full height, measured at pivot)	1,402 lb (at pivot pin)
Loader Breakout Force	200CX: 2,239 lbf (at pin)	2,690 lb

Warranty Length & Coverage	3-year / 2,000-hour limited warranty (as sold new)	Not Published

Find a John Deere dealer near you Find a Mahindra dealer near you

John Deere 2520 vs Mahindra Max 26XLT: Quick Answers

Which has more horsepower, the John Deere 2520 or the Mahindra Max 26XLT?: The John Deere 2520 leads on engine hp at 26.5 hp hp, compared to 25.9 hp hp for the Mahindra Max 26XLT.
Which has more PTO horsepower, the John Deere 2520 or the Mahindra Max 26XLT?: The John Deere 2520 leads on pto hp at 20.5 hp hp, compared to 20.2 hp hp for the Mahindra Max 26XLT.
Which is heavier, the John Deere 2520 or the Mahindra Max 26XLT?: The Mahindra Max 26XLT leads on weight at 1,973 lb lb, compared to 1,865 lb lb for the John Deere 2520.
Which has more loader lift capacity, the John Deere 2520 or the Mahindra Max 26XLT?: The Mahindra Max 26XLT leads on loader lift at 1,402 lb lb, compared to 800 lb lb for the John Deere 2520.
Which has more three-point hitch lift capacity, the John Deere 2520 or the Mahindra Max 26XLT?: The Mahindra Max 26XLT leads on 3-pt lift (24 in) at 2,315 lb lb, compared to 1,150 lb lb for the John Deere 2520.

More Head-to-Heads

Category Verdict

Spec	John Deere 2520	Mahindra Max 26XLT
Engine HP (hp)	▲ 26.5 hp	25.9 hp
PTO HP (hp)	▲ 20.5 hp	20.2 hp
Weight (lb)	1,865 lb	▲ 1,973 lb
Loader Lift (lb)	800 lb	▲ 1,402 lb
3-Pt Lift (24 in) (lb)	1,150 lb	▲ 2,315 lb
Lift Height (in)	78.5 in	▲ 82.7 in
Breakout Force (lbf)	2,239 lbf	▲ 2,690 lbf
Hydraulic Flow (gpm)	▲ 10.5 gpm	8.5 gpm
Travel Speed (mph)	13 mph	n/a

The headline numbers at a glance.

John Deere 2520Mahindra Max 26XLT

Engine HPhp

▲26.5 hp

25.9 hp

PTO HPhp

▲20.5 hp

20.2 hp

Weightlb

1,865 lb

▲1,973 lb

Loader Liftlb

800 lb

▲1,402 lb

3-Pt Lift (24 in)lb

1,150 lb

▲2,315 lb

at pin

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	John Deere2520	MahindraMax 26XLT


Engine Manufacturer	Yanmar	Mitsubishi
Engine Model	3TNV82A-BMJK	S3L2
Engine Type	3-cylinder liquid-cooled diesel	Four-stroke, naturally aspirated, indirect injection, water-cooled diesel
No. of Cylinders	3	3
Displacement	81.2 in³	80.4 in³
Rated Engine Speed	2600 rpm	2500 rpm
Engine Power (Gross)	26.5 hp	25.9 hp
PTO Power	20.5 hp	20.2 hp
Engine Emissions Constraints	Not Published	Not Published
Cooling System Type	Liquid-cooled	Water Cooled
Air Cleaner	Dry type, two stage	Not Published
Fuel System	Not Published	Indirect Injection
Alternator	20 A	50 A, 12 V

Pump Type	Not Published	Not Published
Implement Flow	5.0 gpm	5.8 gpm
Steering Flow	5.5 gpm	Not Published
Total Hydraulic Flow	10.5 gpm	8.5 gpm
Overall Hydraulic Pump Flow	10.5 gpm	8.5 gpm
Hydraulic System Type	Not Published	Open Center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	2	Not Published
No. of Optional Remote Valves	Not Published	Not Published

Fuel Tank Capacity	7.1 gal	6.1 gal
Coolant Capacity	4.1 qt	Not Published
Crankcase Capacity	3.0 qt	Not Published
Transmission / Hydraulic System Capacity	3.9 gal	Not Published
Front Axle Fluid Capacity	3.6 qt	Not Published

PTO Type	Independent	Live
PTO Rear	540 rpm (rear PTO standard)	540 @ 2376 rpm
Mid-PTO Availability	Standard	Optional; 2000 @ 2526 rpm
Category, 3-Point Hitch	Category 1	CAT I
Hitch Lift Capacity	1,433 lb	2,315 lb
Hitch Lift Capacity (at 24”)	1,150 lb	Not Published
Lift Control Type	Position control	Not Published

Transmission Type	2-range hydrostatic	HST - 2 ranges
No. of Speeds	Infinite forward and reverse, 2 ranges	Infinite
Max Travel Speed (Forward)	13.0 mph	Not Published
Max Travel Speed (Reverse)	13.0 mph	Not Published
Clutch	Not Published	Dry - Single
Differential Lock & Limited Slip Options	Not Published	Not Published

Frame Type	Folding ROPS standard	Not Published
Steering	Power steering	Power Steering
Brakes	Wet disk	Wet disc
Seat Suspension & Adjustability	Not Published	Not Published
Front Axle Type	MFWD, standard, all ranges, on-the-go engagement	Not Published
Front Axle Rating	1,940 lb	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Width	51.0 in (minimum, standard tires)	54.3 in
Wheelbase	65.2 in	63.2 in
Ground Clearance	13 in (front axle); 11 in (rear axle drawbar)	11.4 in
Min. Turn Radius without Brakes	8.2 ft	7.2 ft
Height to Top of ROPS	90 in	84.3 in
Height to Top of ROPS (folded)	68.9 in	Not Published
Height to Top of Cab Model	Not Published	Not Published
Overall Length	108.9 in (with 3-point hitch)	110 in

Tractor Weight (Base)	1,865 lb (with all fluids)	1,973 lb
Weight with ROPS and Loader	Not Published	2,600 lb (1,973 + 627, computed; MXLT6.9 gal loader shipping weight)
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	R3 turf standard (24x8.5-14 front, 36x14.00-15 rear); R4 industrial optional (23x8.5-12 front, 14-17.5 rear)	Ag, Industrial, Turf
R1 Agricultural - Front	Not Published	7-12
R1 Agricultural - Rear	Not Published	9.5-16
R3 Turf - Front	24x8.5-14	23x8.5-12
R3 Turf - Rear	36x14.00-15	33x12.5-15
R4 Industrial - Front	23x8.5-12	23x8.50-12
R4 Industrial - Rear	14-17.5	12-16.5

Quick Attach Loader System	Tool-free attach-and-park mounting; 200CX attaches and detaches in under 3 minutes	Quick-Attach Adapter (included)
Loader Model	200X; 200CX	MXLT26L
Loader Lift Height	200CX: 78.5 in	82.7 in
Loader Lift Capacity (Full Height)	200CX: 800 lb (at full height, measured at pivot)	1,402 lb (at pivot pin)
Loader Breakout Force	200CX: 2,239 lbf (at pin)	2,690 lb

Warranty Length & Coverage	3-year / 2,000-hour limited warranty (as sold new)	Not Published

Find a John Deere dealer near you Find a Mahindra dealer near you

John Deere 2520 vs Mahindra Max 26XLT: Quick Answers

Which has more horsepower, the John Deere 2520 or the Mahindra Max 26XLT?

The John Deere 2520 leads on engine hp at 26.5 hp hp, compared to 25.9 hp hp for the Mahindra Max 26XLT.

Which has more PTO horsepower, the John Deere 2520 or the Mahindra Max 26XLT?

The John Deere 2520 leads on pto hp at 20.5 hp hp, compared to 20.2 hp hp for the Mahindra Max 26XLT.

Which is heavier, the John Deere 2520 or the Mahindra Max 26XLT?

The Mahindra Max 26XLT leads on weight at 1,973 lb lb, compared to 1,865 lb lb for the John Deere 2520.

Which has more loader lift capacity, the John Deere 2520 or the Mahindra Max 26XLT?

The Mahindra Max 26XLT leads on loader lift at 1,402 lb lb, compared to 800 lb lb for the John Deere 2520.

Which has more three-point hitch lift capacity, the John Deere 2520 or the Mahindra Max 26XLT?

The Mahindra Max 26XLT leads on 3-pt lift (24 in) at 2,315 lb lb, compared to 1,150 lb lb for the John Deere 2520.

John Deere 2520 vs Mahindra Max 26XLT

Category Verdict

Full Spec Sheet

John Deere 2520 vs Mahindra Max 26XLT: Quick Answers

More Head-to-Heads

More in the resource center

Look up a tractor

Side-by-side comparison

The Netflix of tractor videos

Tractor guides and articles

John Deere 2520 vs Mahindra Max 26XLT

Category Verdict

Full Spec Sheet

John Deere 2520 vs Mahindra Max 26XLT: Quick Answers

More Head-to-Heads