Massey Ferguson 2855M vs New Holland Boomer 50

Every published spec for both machines, side by side. The verdict below is computed straight from the spec sheets, not opinion.

Across 7 measurable specs, the Massey Ferguson 2855M leads 5 categories to 1 (1 tied). Machine pages: Massey Ferguson 2855M and New Holland Boomer 50.

Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.

Category Verdict

Spec	Massey Ferguson 2855M	New Holland Boomer 50
Engine HP (hp)	▲ 53.6 hp	52.8 hp
PTO HP (hp)	40 hp	40 hp
Weight (lb)	4,420 lb	n/a
Loader Lift (lb)	▲ 2,570 lb	2,371 lb
3-Pt Lift (24 in) (lb)	▲ 3,086 lb	2,469 lb
Lift Height (in)	▲ 111 in	109 in
Breakout Force (lbf)	3,910 lbf	▲ 4,081 lbf
Hydraulic Flow (gpm)	▲ 19.6 gpm	14.8 gpm
Travel Speed (mph)	n/a	16.8 mph

The headline numbers at a glance.

Massey Ferguson 2855MNew Holland Boomer 50

Engine HPhp

▲53.6 hp

52.8 hp

PTO HPhp

▲40 hp

Weightlb

4,035 lb

▲4,420 lb

n/a

ROPSCab

Loader Liftlb

▲2,570 lb

2,371 lb

3-Pt Lift (24 in)lb

▲3,086 lb

2,469 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	Massey Ferguson2855M	New HollandBoomer 50


Engine Manufacturer	Iseki	LS Mtron
Engine Model	Iseki E4FH	LS Mtron L3C19-T
Engine Type	4-cylinder, turbocharged, liquid-cooled diesel	Water-cooled, 4-stroke common rail turbocharged diesel
No. of Cylinders	4	3
Displacement	148.6 in³	114.7 in³
Rated Engine Speed	2600 rpm	2600 rpm
Engine Power (Gross)	53.6 hp	52.8 hp @ 600 rpm
PTO Power	40 hp	40 hp
Engine Emissions Constraints	Tier 4	Tier 4B Final
Cooling System Type	Liquid cooled	Pressurized liquid w/ recirculating bypass
Air Cleaner	Dry	Not Published
Fuel System	Common rail direct injection	High pressure common rail (ECU controlled)
Alternator	Not Published	70 A, 12 V

Pump Type	Two gear-type pumps for steering and 3-point/remotes	Gear
Implement Flow	12.6 gpm	8.5 gpm
Steering Flow	7 gpm	HST: 6.3 gpm; Gear: 4.2 gpm
Total Hydraulic Flow	19.6 gpm (12.6 + 7, computed)	HST: 14.8 gpm; Gear: 12.7 gpm
Overall Hydraulic Pump Flow	19.6 gpm (12.6 + 7, computed)	HST: 14.8 gpm; Gear: 12.7 gpm
Hydraulic System Type	Open center	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	Not Published	1
No. of Optional Remote Valves	Not Published	1

Fuel Tank Capacity	14.0 gal	11.0 gal
Coolant Capacity	7.61 qt	2.3 gal
Crankcase Capacity	7.82 qt	5.8 qt
Transmission / Hydraulic System Capacity	10.04 gal	11.4 gal
Front Axle Fluid Capacity	9 qt	2.2 gal

PTO Type	Independent with SoftStart electronic modulation	Independent, electro-hydraulic engagement
PTO Rear	540 rpm (1-3/8 in)	540 rpm
Mid-PTO Availability	Optional, 2,000 rpm	Optional
Category, 3-Point Hitch	Category I and II	Category I
Hitch Lift Capacity	3,483 lb	2,756 lb
Hitch Lift Capacity (at 24”)	3,086 lb	2,469 lb
Lift Control Type	Not Published	Position control

Transmission Type	12x12 power shuttle	HST: 3-range hydrostatic; Gear: 16x16
No. of Speeds	12 forward and 12 reverse	HST: 3-range; Gear: 16F/16R
Max Travel Speed (Forward)	Not Published	HST: 15.63 mph; Gear: 16.8 mph
Max Travel Speed (Reverse)	Not Published	HST: 11.37 mph; Gear: 15.3 mph
Clutch	Not Published	HST: Not Applicable; Gear: Dry disc
Differential Lock & Limited Slip Options	Not Published	Differential lock

Frame Type	Not Published	Not Published
Steering	Power steering	Power steering
Brakes	Wet disc	Wet disc
Seat Suspension & Adjustability	Open station: vinyl-clad seat; standard cab: spring-suspension seat with armrests; deluxe cab: air-ride seat with armrests	Not Published
Front Axle Type	Solid cast front axle	4WD (FWD)
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Short: 2,317 lb; Regular: 1,598 lb; Extend: 1,091 lb

Overall Length with 3-Point Hitch	132.3 in	142 in
Overall Width	70.1 in	63 in
Wheelbase	Not Published	73 in
Ground Clearance	14.0 in	15 in
Min. Turn Radius without Brakes	Not Published	Not Published
Height to Top of ROPS	102.4 in	96 in
Height to Top of ROPS (folded)	Not Published	Not Published
Height to Top of Cab Model	92.9 in	91 in

Tractor Weight (Base)	ROPS: 4,035 lb; Cab: 4,420 lb	Not Published
Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	R1 Agricultural, R3 Turf, R4 Industrial	R1 Agricultural, R3 Turf, R4 Industrial
R1 Agricultural - Front	9.5-16	9.5-16
R1 Agricultural - Rear	13.6-28 standard; 16.9-24 optional	13.6-24
R3 Turf - Front	27x10.50-15	28X8.50-15
R3 Turf - Rear	44x18.00-20	41X14.00-20
R4 Industrial - Front	10-16.5	12X16.5
R4 Industrial - Rear	14.9-24; 17.5L-24	17.5LX24

Quick Attach Loader System	FL2814: pin-type or skid steer	260TLA: New Holland Quick Mount; optional skid steer quick attach plates
Loader Model	FL2814	Not Published
Loader Lift Height	FL2814: 111 in	109 in
Loader Lift Capacity (Full Height)	FL2814: 2,570 lb	2,371 lb
Loader Breakout Force	FL2814: 3,910 lb	4,081 lb

Warranty Length & Coverage	5-year powertrain warranty	6-year limited powertrain, 2-year full coverage

Find a dealer near you Find a New Holland dealer near you

Massey Ferguson 2855M vs New Holland Boomer 50: Quick Answers

Which has more horsepower, the Massey Ferguson 2855M or the New Holland Boomer 50?: The Massey Ferguson 2855M leads on engine hp at 53.6 hp hp, compared to 52.8 hp hp for the New Holland Boomer 50.
Which has more PTO horsepower, the Massey Ferguson 2855M or the New Holland Boomer 50?: They are effectively tied: both machines are rated at 40 hp hp for pto hp.
Which has more loader lift capacity, the Massey Ferguson 2855M or the New Holland Boomer 50?: The Massey Ferguson 2855M leads on loader lift at 2,570 lb lb, compared to 2,371 lb lb for the New Holland Boomer 50.
Which has more three-point hitch lift capacity, the Massey Ferguson 2855M or the New Holland Boomer 50?: The Massey Ferguson 2855M leads on 3-pt lift (24 in) at 3,086 lb lb, compared to 2,469 lb lb for the New Holland Boomer 50.

More Head-to-Heads

Category Verdict

Spec	Massey Ferguson 2855M	New Holland Boomer 50
Engine HP (hp)	▲ 53.6 hp	52.8 hp
PTO HP (hp)	40 hp	40 hp
Weight (lb)	4,420 lb	n/a
Loader Lift (lb)	▲ 2,570 lb	2,371 lb
3-Pt Lift (24 in) (lb)	▲ 3,086 lb	2,469 lb
Lift Height (in)	▲ 111 in	109 in
Breakout Force (lbf)	3,910 lbf	▲ 4,081 lbf
Hydraulic Flow (gpm)	▲ 19.6 gpm	14.8 gpm
Travel Speed (mph)	n/a	16.8 mph

The headline numbers at a glance.

Massey Ferguson 2855MNew Holland Boomer 50

Engine HPhp

▲53.6 hp

52.8 hp

PTO HPhp

▲40 hp

Weightlb

4,035 lb

▲4,420 lb

n/a

ROPSCab

Loader Liftlb

▲2,570 lb

2,371 lb

3-Pt Lift (24 in)lb

▲3,086 lb

2,469 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	Massey Ferguson2855M	New HollandBoomer 50


Engine Manufacturer	Iseki	LS Mtron
Engine Model	Iseki E4FH	LS Mtron L3C19-T
Engine Type	4-cylinder, turbocharged, liquid-cooled diesel	Water-cooled, 4-stroke common rail turbocharged diesel
No. of Cylinders	4	3
Displacement	148.6 in³	114.7 in³
Rated Engine Speed	2600 rpm	2600 rpm
Engine Power (Gross)	53.6 hp	52.8 hp @ 600 rpm
PTO Power	40 hp	40 hp
Engine Emissions Constraints	Tier 4	Tier 4B Final
Cooling System Type	Liquid cooled	Pressurized liquid w/ recirculating bypass
Air Cleaner	Dry	Not Published
Fuel System	Common rail direct injection	High pressure common rail (ECU controlled)
Alternator	Not Published	70 A, 12 V

Pump Type	Two gear-type pumps for steering and 3-point/remotes	Gear
Implement Flow	12.6 gpm	8.5 gpm
Steering Flow	7 gpm	HST: 6.3 gpm; Gear: 4.2 gpm
Total Hydraulic Flow	19.6 gpm (12.6 + 7, computed)	HST: 14.8 gpm; Gear: 12.7 gpm
Overall Hydraulic Pump Flow	19.6 gpm (12.6 + 7, computed)	HST: 14.8 gpm; Gear: 12.7 gpm
Hydraulic System Type	Open center	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	Not Published	1
No. of Optional Remote Valves	Not Published	1

Fuel Tank Capacity	14.0 gal	11.0 gal
Coolant Capacity	7.61 qt	2.3 gal
Crankcase Capacity	7.82 qt	5.8 qt
Transmission / Hydraulic System Capacity	10.04 gal	11.4 gal
Front Axle Fluid Capacity	9 qt	2.2 gal

PTO Type	Independent with SoftStart electronic modulation	Independent, electro-hydraulic engagement
PTO Rear	540 rpm (1-3/8 in)	540 rpm
Mid-PTO Availability	Optional, 2,000 rpm	Optional
Category, 3-Point Hitch	Category I and II	Category I
Hitch Lift Capacity	3,483 lb	2,756 lb
Hitch Lift Capacity (at 24”)	3,086 lb	2,469 lb
Lift Control Type	Not Published	Position control

Transmission Type	12x12 power shuttle	HST: 3-range hydrostatic; Gear: 16x16
No. of Speeds	12 forward and 12 reverse	HST: 3-range; Gear: 16F/16R
Max Travel Speed (Forward)	Not Published	HST: 15.63 mph; Gear: 16.8 mph
Max Travel Speed (Reverse)	Not Published	HST: 11.37 mph; Gear: 15.3 mph
Clutch	Not Published	HST: Not Applicable; Gear: Dry disc
Differential Lock & Limited Slip Options	Not Published	Differential lock

Frame Type	Not Published	Not Published
Steering	Power steering	Power steering
Brakes	Wet disc	Wet disc
Seat Suspension & Adjustability	Open station: vinyl-clad seat; standard cab: spring-suspension seat with armrests; deluxe cab: air-ride seat with armrests	Not Published
Front Axle Type	Solid cast front axle	4WD (FWD)
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Short: 2,317 lb; Regular: 1,598 lb; Extend: 1,091 lb

Overall Length with 3-Point Hitch	132.3 in	142 in
Overall Width	70.1 in	63 in
Wheelbase	Not Published	73 in
Ground Clearance	14.0 in	15 in
Min. Turn Radius without Brakes	Not Published	Not Published
Height to Top of ROPS	102.4 in	96 in
Height to Top of ROPS (folded)	Not Published	Not Published
Height to Top of Cab Model	92.9 in	91 in

Tractor Weight (Base)	ROPS: 4,035 lb; Cab: 4,420 lb	Not Published
Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	R1 Agricultural, R3 Turf, R4 Industrial	R1 Agricultural, R3 Turf, R4 Industrial
R1 Agricultural - Front	9.5-16	9.5-16
R1 Agricultural - Rear	13.6-28 standard; 16.9-24 optional	13.6-24
R3 Turf - Front	27x10.50-15	28X8.50-15
R3 Turf - Rear	44x18.00-20	41X14.00-20
R4 Industrial - Front	10-16.5	12X16.5
R4 Industrial - Rear	14.9-24; 17.5L-24	17.5LX24

Quick Attach Loader System	FL2814: pin-type or skid steer	260TLA: New Holland Quick Mount; optional skid steer quick attach plates
Loader Model	FL2814	Not Published
Loader Lift Height	FL2814: 111 in	109 in
Loader Lift Capacity (Full Height)	FL2814: 2,570 lb	2,371 lb
Loader Breakout Force	FL2814: 3,910 lb	4,081 lb

Warranty Length & Coverage	5-year powertrain warranty	6-year limited powertrain, 2-year full coverage

Find a dealer near you Find a New Holland dealer near you

Massey Ferguson 2855M vs New Holland Boomer 50: Quick Answers

Which has more horsepower, the Massey Ferguson 2855M or the New Holland Boomer 50?

The Massey Ferguson 2855M leads on engine hp at 53.6 hp hp, compared to 52.8 hp hp for the New Holland Boomer 50.

Which has more PTO horsepower, the Massey Ferguson 2855M or the New Holland Boomer 50?

They are effectively tied: both machines are rated at 40 hp hp for pto hp.

Which has more loader lift capacity, the Massey Ferguson 2855M or the New Holland Boomer 50?

The Massey Ferguson 2855M leads on loader lift at 2,570 lb lb, compared to 2,371 lb lb for the New Holland Boomer 50.

Which has more three-point hitch lift capacity, the Massey Ferguson 2855M or the New Holland Boomer 50?

The Massey Ferguson 2855M leads on 3-pt lift (24 in) at 3,086 lb lb, compared to 2,469 lb lb for the New Holland Boomer 50.

Massey Ferguson 2855M vs New Holland Boomer 50

Category Verdict

Full Spec Sheet

Massey Ferguson 2855M vs New Holland Boomer 50: Quick Answers

More Head-to-Heads

More in the resource center

Look up a tractor

Side-by-side comparison

The Netflix of tractor videos

Tractor guides and articles

Massey Ferguson 2855M vs New Holland Boomer 50

Category Verdict

Full Spec Sheet

Massey Ferguson 2855M vs New Holland Boomer 50: Quick Answers

More Head-to-Heads