See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
1,829.8 lb (1,829 lbs) for 2024H, 2,107.6 lb (2,107 lbs) for 3026H
—
Weight with ROPS and Loader
Not Published
Not Published
Weight with Cab and Loader
2,106 lbs - base tractor with loader, no cab option confirmed for 3026 in available sources
Not Published
Warranty Length & Coverage
6-year powertrain warranty
24 months / 1,500 hours (whichever occurs first) - covers defects in material and workmanship
Pump Type
Gear type pump with primary and secondary pumps
Gear
Steering Flow
3.1 gpm
N/A
Implement Flow
4.3 gpm
6.5 gpm (24.5 Lpm)
Total Hydraulic Flow
7.4 gpm 28.0 lpm
7.2 gpm
Hydraulic System Type
Power Assisted Hydro-Static
Open Center
System Operating Pressure
352.7 lbf/cm² (max operating pressure)
—
Rear Remote Hydraulic Flow
Not Published
NOT FOUND
Overall Hydraulic Pump Flow
7.7 gal per min
7.2 gpm
No. of Optional Remote Valves
Optional (Up To 1)
1 Pair
No. of Standard Remote Valves
0
1
PTO Rear
540 / 960 rpm @ 2,600 rpm
540 rpm
PTO Type
Live P.T.O. (6 Spline shaft)
Independent
Lift Control Type
Position control
Hydraulic Position Control System
Hitch Lift Capacity
1,433 lbs
700 lb.
Mid-PTO Availability
Option: 2,500 rpm (Mid)
Standard: 2200 rpm
Category, 3-Point Hitch
Cat 1
Category 1 Limited
Hitch Lift Capacity (at 24”)
974 lb
700 lb
R3 Turf - Rear
Not Published
26X12.00-12
R3 Turf - Front
Not Published
18X8.5-10
Tire Size & Options
IND (Industrial) Front: 25×8.50-14; IND Rear: 14×17.5
Front AG. (TURF, INDUSTRIAL) 18X8.5-10; Rear AG. (TURF, INDUSTRIAL) 26X12.00-12
R4 Industrial - Rear
14X17.5
26X12.00-12
R4 Industrial - Front
25X8.50-14
18X8.5-10
R1 Agricultural - Rear
11.2-20 8PR
26X12.00-12
R1 Agricultural - Front
7-16 6PR
18X8.5-10
Coolant Capacity
1.21 gal
2.0 (1.9) qts (L)
Crankcase Capacity
0.79 gal
5.2 (4.9) qts (L)
Fuel Tank Capacity
6.08 gal
6.7 gal.
Front Axle Fluid Capacity
0.79 gal
NOT FOUND
Transmission / Hydraulic System Capacity
2.90 gal
NOT FOUND
Loader Lift Height
86 in.
71.9 in.
Loader Breakout Force
1,960 lbs.
1554 lb.
Quick Attach Loader System
SSQA
Standard Quick Attach Mounting System
Loader Lift Capacity (Full Height)
1,314 lbs.
608 lb.
Loader Model
—
FL6
Clutch
Dry Single Plate
Clutch-free (Hydrostatic)
No. of Speeds
3 Range
2
Transmission Type
Hydrostatic (HST)
2-Range HST
Max Travel Speed (Forward)
14.8 mph
11.1 mph (17.8 km/hr.)
Max Travel Speed (Reverse)
14.8 mph
7.6 mph (12.2 km/hr.)
Differential Lock & Limited Slip Options
Differential Lock
Std
Brakes
Wet, Multi-Disc
Wet Multi-disc
Steering
Hydrostatic
Hydrostatic Power Steering
Frame Type
Steel frame with cast iron axles
Not Published
Front Axle Type
4 Wheel Drive
Not Published
Drawbar Capacity
Not Published
7.7 kN / 1730 lb
Front Axle Rating
Not Published
Not Published
Seat Suspension & Adjustability
Adjustable seat; flips up and back for rear backhoe operation
Suspension Seat ■
Wheelbase
65.7"
55.1 in.
Overall Width
53.8"
46.0 in.
Overall Length
120.7 in for 2024H, 122.9 in for 3026H
—
Ground Clearance
16.4"
6.3 in.
Height to Top of ROPS
91.4"
87.6 in.
Height to Top of Cab Model
Not Applicable
NOT FOUND — no source lists a cab-model height. The CT1021 is an open-station (two-post folding ROPS) machine; a Field Cab is a dealer-installed option only, and no cab height spec was found in any source.
Height to Top of ROPS (folded)
91.4 in - ROPS up (no folded dimension found in available sources)
NOT FOUND — no source explicitly lists the folded ROPS height. The only height figure available across all sources is Height (ROPS) [upright]: 87.6 in (2225 mm)
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
