See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
24 months / 1,500 hours (whichever occurs first) - covers defects in material and workmanship
—
Pump Type
Gear
—
Steering Flow
N/A
—
Implement Flow
6.5 gpm (24.5 Lpm)
—
Total Hydraulic Flow
7.2 gpm
13.3 LPM
Hydraulic System Type
Open Center
—
Rear Remote Hydraulic Flow
NOT FOUND
—
Overall Hydraulic Pump Flow
7.2 gpm
—
No. of Optional Remote Valves
1 Pair
—
No. of Standard Remote Valves
1
—
PTO Rear
540 rpm
—
PTO Type
Independent
Mechanical
Lift Control Type
Hydraulic Position Control System
—
Hitch Lift Capacity
700 lb.
—
Mid-PTO Availability
Standard: 2200 rpm
—
Category, 3-Point Hitch
Category 1 Limited
—
Hitch Lift Capacity (at 24”)
700 lb
—
R3 Turf - Rear
26X12.00-12
33x15.5-16.5
R3 Turf - Front
18X8.5-10
23x8.50-12
Tire Size & Options
Front AG. (TURF, INDUSTRIAL) 18X8.5-10; Rear AG. (TURF, INDUSTRIAL) 26X12.00-12
—
R4 Industrial - Rear
26X12.00-12
33x15.5-16.5
R4 Industrial - Front
18X8.5-10
23x8.50-12
R1 Agricultural - Rear
26X12.00-12
8.00 - 18
R1 Agricultural - Front
18X8.5-10
5.00 - 12
Coolant Capacity
2.0 (1.9) qts (L)
—
Crankcase Capacity
5.2 (4.9) qts (L)
—
Fuel Tank Capacity
6.7 gal.
—
Front Axle Fluid Capacity
NOT FOUND
—
Transmission / Hydraulic System Capacity
NOT FOUND
—
Loader Model
FL6
—
Loader Lift Height
71.9 in.
—
Loader Breakout Force
1554 lb.
—
Quick Attach Loader System
Standard Quick Attach Mounting System
—
Loader Lift Capacity (Full Height)
608 lb.
—
Clutch
Clutch-free (Hydrostatic)
Single Clutch
No. of Speeds
2
6F+2R
Transmission Type
2-Range HST
Sliding Mesh
Max Travel Speed (Forward)
11.1 mph (17.8 km/hr.)
15.26 Km/Hr @ 2700
Max Travel Speed (Reverse)
7.6 mph (12.2 km/hr.)
—
Differential Lock & Limited Slip Options
Std
Yes, Foot Operated
Brakes
Wet Multi-disc
Dry Drum Brakes
Steering
Hydrostatic Power Steering
Power Steering
Frame Type
Not Published
—
Front Axle Type
Not Published
4WD
Drawbar Capacity
7.7 kN / 1730 lb
—
Front Axle Rating
Not Published
—
Seat Suspension & Adjustability
Suspension Seat ■
—
Wheelbase
55.1 in.
55.9 in
Overall Width
46.0 in.
—
Ground Clearance
6.3 in.
7.9 in
Height to Top of ROPS
87.6 in.
75.8 in
Height to Top of Cab Model
NOT FOUND — no source lists a cab-model height. The CT1021 is an open-station (two-post folding ROPS) machine; a Field Cab is a dealer-installed option only, and no cab height spec was found in any source.
NOT FOUND — No cab model exists for the Solis S20. Unit is equipped with a Two-post ROPS only. Height to top of ROPS is listed as 1945mm in the operator manual source.
Height to Top of ROPS (folded)
NOT FOUND — no source explicitly lists the folded ROPS height. The only height figure available across all sources is Height (ROPS) [upright]: 87.6 in (2225 mm)
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
