See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
24 months / 1,500 hours (whichever occurs first) - covers defects in material and workmanship
Up to 2 years or until the 2,000 hours mark, bumper-to-bumper warranty; 3000 hours maximum coverage period for parts and labour on drivetrains or powertrains; 12-months warranty period for implements, including loaders and backhoes.
Pump Type
Gear
Single Gear Pump
Steering Flow
N/A
4.3 gpm | 16.2 l/min
Implement Flow
6.5 gpm (24.5 Lpm)
3.1 gpm | 11.7 l/min
Total Hydraulic Flow
7.2 gpm
7.4 gpm | 28 l/min
Hydraulic System Type
Open Center
open center
Rear Remote Hydraulic Flow
NOT FOUND
3.1 gpm 11.7 lpm
Overall Hydraulic Pump Flow
7.2 gpm
Total: 7.9 gpm [Implement: 4.65 gpm | Steering: 3.3 gpm] - Note: older/dealer spec sheets also cite 7.4 gpm total; 7.9 gpm appears on 2025 model listing
No. of Optional Remote Valves
1 Pair
Optional (2)
No. of Standard Remote Valves
1
0
PTO Rear
540 rpm
540 rpm
PTO Type
Independent
Live
Lift Control Type
Hydraulic Position Control System
Position
Hitch Lift Capacity
700 lb.
1499 lb | 1,499.1 lb
Mid-PTO Availability
Standard: 2200 rpm
Mid-PTO available; 2,500 RPM mid-mount PTO option
Category, 3-Point Hitch
Category 1 Limited
I
Hitch Lift Capacity (at 24”)
700 lb
974 lb
R3 Turf - Rear
26X12.00-12
33x12.50-16.5
R3 Turf - Front
18X8.5-10
23x8.50-12
Tire Size & Options
Front AG. (TURF, INDUSTRIAL) 18X8.5-10; Rear AG. (TURF, INDUSTRIAL) 26X12.00-12
Skid Steer style quick attach; BL110S loader with skid steer quick attach bucket (50" standard bucket)
Loader Lift Capacity (Full Height)
608 lb.
1373 lb | 1,373.5 lbf
Clutch
Clutch-free (Hydrostatic)
Dry Single Plate
No. of Speeds
2
3-Range
Transmission Type
2-Range HST
HST
Max Travel Speed (Forward)
11.1 mph (17.8 km/hr.)
17 mph | 27.3 kmph
Max Travel Speed (Reverse)
7.6 mph (12.2 km/hr.)
Not Published
Differential Lock & Limited Slip Options
Std
Not Published
Brakes
Wet Multi-disc
Wet, Multi-disc
Steering
Hydrostatic Power Steering
Hydrostatic
Frame Type
Not Published
Not Published
Front Axle Type
Not Published
Four-wheel drive
Drawbar Capacity
7.7 kN / 1730 lb
Not Published
Front Axle Rating
Not Published
Not Published
Seat Suspension & Adjustability
Suspension Seat ■
Comfortable suspension seat
Wheelbase
55.1 in.
65.7 in. | 65.7 in
Overall Width
46.0 in.
53.8 in. | 53.9 in
Ground Clearance
6.3 in.
15.1 in. | 15 in
Height to Top of ROPS
87.6 in.
91.5 in. | 91.7 in
Height to Top of Cab Model
NOT FOUND — no source lists a cab-model height. The CT1021 is an open-station (two-post folding ROPS) machine; a Field Cab is a dealer-installed option only, and no cab height spec was found in any source.
Not Applicable
Height to Top of ROPS (folded)
NOT FOUND — no source explicitly lists the folded ROPS height. The only height figure available across all sources is Height (ROPS) [upright]: 87.6 in (2225 mm)
Not specified in searched sources; ROPS is confirmed foldable but folded height not published
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
