▶ EnginePTO Power 21.8 hp NOT FOUND Alternator Not Published 42 A, 12 V Air Cleaner Not Published Dry with Clogging Sensor Engine Type Diesel 3-Cylinder Diesel Engine Fuel System Not Published — Displacement 97.6 in³ 80.5 in³ No. of Cylinders 3 3 Rated Engine Speed 2400 rpm 2500 rpm Cooling System Type Not Published NOT FOUND — no cooling system type explicitly stated for the H26 in any retrieved source Engine Manufacturer Not Published Mitsubishi Engine Power (Gross) 24.5 hp 26 hp Engine Emissions Constraints Not Published NOT FOUND Engine Model — NOT FOUND ▶ WeightWeight with ROPS and Loader Not Published — Weight with Cab and Loader Not Applicable — ▶ WarrantyWarranty Length & Coverage 24 months / 1,500 hours (whichever occurs first) — ▶ HydraulicsPump Type Not Published — Steering Flow 4.5 gpm — Implement Flow 6.9 gpm — Total Hydraulic Flow 11.4 gpm — Hydraulic System Type Not Published — Rear Remote Hydraulic Flow Not Published — Overall Hydraulic Pump Flow 11.4 gpm — No. of Optional Remote Valves 2 pairs (optional) 3 DA (Cabin) No. of Standard Remote Valves Not Published 1 DA ▶ PTO & HitchPTO Rear 540 rpm — PTO Type Live — Lift Control Type Hydraulic position control system NOT FOUND Hitch Lift Capacity 1,631 lb — Mid-PTO Availability 1,976 rpm (optional) Yes - Mid & Rear PTO standard Category, 3-Point Hitch Category 1 — Hitch Lift Capacity (at 24”) 1,631 lb — ▶ Tire OptionsR3 Turf - Rear Not Published 13.80-16 R3 Turf - Front Not Published 25x8.50-14 Tire Size & Options Not Published — R4 Industrial - Rear Not Published 33x15.50-16.5 R4 Industrial - Front Not Published 23x8.50-12 R1 Agricultural - Rear Not Published 280/70 R18 R1 Agricultural - Front Not Published 6.5/80-12 | 280/70 R18 ▶ Fluid CapacityCoolant Capacity Not Published — Crankcase Capacity Not Published — Fuel Tank Capacity 9.0 gal — Front Axle Fluid Capacity Rear (Std); Mid (optional) — Transmission / Hydraulic System Capacity Not Published — ▶ Loader & AttachmentsLoader Lift Height Not Published — Loader Breakout Force Not Published NOT FOUND Quick Attach Loader System Standard quick attach mounting system YES optional Loader Lift Capacity (Full Height) 1,369 lb — ▶ Transmission & DrivetrainClutch Not Published Wet Type Clutch for PTO No. of Speeds Infinite, 3-range (HST); 9F x 3R (MST) 2-speed hydrostatic Transmission Type 3-range HST (HST); Manual 9F x 3R (MST) Hydrostatic Max Travel Speed (Forward) 9.7 mph (15.6 km/hr) (HST); 9.4 mph (15.2 km/hr) (MST) 21.03 Km/Hr @2660 Max Travel Speed (Reverse) 8.7 mph (14.0 km/hr) (HST); 6.2 mph (9.9 km/hr) (MST) NOT FOUND Differential Lock & Limited Slip Options Std — ▶ Chassis, Steering & ControlsBrakes Wet multi-disc — Steering Hydrostatic power steering Power Steering Frame Type Not Published — Front Axle Type Not Published 4WD Drawbar Capacity Not Published — Front Axle Rating Not Published — Seat Suspension & Adjustability Adjustable seat (Std) Suspended seat with: suspension adjustment knob (knob 2), vertical height adjustment knob (knob 3), horizontal fore/aft lever (lever 1); operator weight range adjustable 50-308.6 lbf ▶ Dimensions & ManeuverabilityWheelbase 65.7 in 61.8 in Overall Width 62.4 in — Ground Clearance 11.7 in — Height to Top of ROPS 92.2 in 92.5 in Height to Top of Cab Model Not Applicable NOT FOUND — H26 is listed as ROPS-only in all sources; no cab model height found Height to Top of ROPS (folded) Not Published NOT FOUND Min. Turn Radius without Brakes 96.5 in — Overall Length with 3-Point Hitch 120.9 in — ▶ ITC Company AccessoriesAccessories that fit None tagged yet 
