Bobcat CT2535 vs Bad Boy Tractors 4035 | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Every published spec, side by side, including the details the graphs above don't chart.
Spec
BobcatCT2535
Bad Boy Tractors4035
PTO Power
29.4 hp
30 hp
Alternator
alternator
50 A, 12 V
Air Cleaner
Dry type, replaceable
Not Published
Engine Type
Diesel
3 Cylinder, Water-Cooled, Diesel
Fuel System
Common Rail Direct Injection (CRDI)
Diesel fuel
Displacement
111.4 in³
104.7 in³
Engine Model
Daedong 0.5 gal 3-cyl diesel
n/a
No. of Cylinders
3
3
Rated Engine Speed
2600 rpm
2600 rpm
Cooling System Type
Water cooled
Water cooled
Engine Manufacturer
Daedong
A1700N4-BUTC_4
Engine Power (Gross)
34.9 hp
34.9 hp
Engine Emissions Constraints
Tier 4
EPA Final Tier4
Weight with ROPS and Loader
Not Applicable
3163 lbs
Weight with Cab and Loader
1652.00 KG
3,728 lbs
Tractor Weight (Base)
n/a
3,496.5 lb (3,497 lbs) for ROPS MODEL; 3,728 lb (3,728 lbs) for CABIN MODEL
Warranty Length & Coverage
24 months / 1,500 hours (whichever occurs first)
6-year powertrain warranty
Pump Type
NOT FOUND — no source explicitly names the pump type (e.g. gear, piston, etc.) for the CT2535. The Bobcat EU page lists 'Implement pump type · 26.00' but this appears to be a flow value (L/min), not a pump type descriptor.
Not Published
Steering Flow
16.90
4.4 gpm
Implement Flow
26.00
8.2 gpm
Total Hydraulic Flow
11.4 gpm
12.6 gpm (4.4+8.2)
Hydraulic System Type
NOT FOUND — no source explicitly labels a 'Hydraulic System Type' field for the CT2535. The EU Bobcat page lists 'Power steering pump (4 port)' and separate implement flow, suggesting an open-center or load-sensing split system, but no source uses that label explicitly.
Open Center
Rear Remote Hydraulic Flow
N/A
Not Published
Overall Hydraulic Pump Flow
11.4 gpm
12.6 gpm
No. of Optional Remote Valves
2 Pairs
Optional (up to 2)
No. of Standard Remote Valves
Std. (4 port)
Not Published
System Operating Pressure
n/a
180 - 407.9 lbf/cm² for control valve
PTO Rear
540 rpm
540 RPM
PTO Type
Independent
Independent
Lift Control Type
Hydraulic Position Control System
Position Control
Hitch Lift Capacity
1631 lb.
3,306.9 lb
Mid-PTO Availability
Optional: 1988 rpm
Not Published
Category, 3-Point Hitch
Category 1
Cat 1
Hitch Lift Capacity (at 24”)
1,631 lb
2,425 lb
R3 Turf - Rear
41x14.0-20 R3
Not Published
R3 Turf - Front
27x8.5-15 R3
Not Published
Tire Size & Options
3,585 lb
Std (manual): 8.0-16 / 12.4-24; IND (website): 28X8.50-15 / 43X16.00-20
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
