Bad Boy Tractors 4035 vs Bobcat CT2535

Across 8 measurable specs, the Bad Boy Tractors 4035 leads 7 categories to 0 (1 tied). Machine pages: Bad Boy Tractors 4035 and Bobcat CT2535.

Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.

Category Verdict

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	Bad Boy Tractors4035	BobcatCT2535

▶Engine
PTO Power	30 hp	29.4 hp
Alternator	50 A, 12 V	alternator
Air Cleaner	Not Published	Dry type, replaceable
Engine Type	3 Cylinder, Water-Cooled, Diesel	Diesel
Fuel System	Diesel fuel	Common Rail Direct Injection (CRDI)
Displacement	104.7 in³	111.4 in³
No. of Cylinders	3	3
Rated Engine Speed	2600 rpm	2600 rpm
Cooling System Type	Water cooled	Water cooled
Engine Manufacturer	A1700N4-BUTC_4	Daedong
Engine Power (Gross)	34.9 hp	34.9 hp
Engine Emissions Constraints	EPA Final Tier4	Tier 4
Engine Model	—	Daedong 0.5 gal 3-cyl diesel
▶Weight
Tractor Weight (Base)	3,496.5 lb (3,497 lbs) for ROPS MODEL; 3,728 lb (3,728 lbs) for CABIN MODEL	—
Weight with ROPS and Loader	3163 lbs	Not Applicable
Weight with Cab and Loader	3,728 lbs	1652.00 KG
▶Warranty
Warranty Length & Coverage	6-year powertrain warranty	24 months / 1,500 hours (whichever occurs first)
▶Hydraulics
Pump Type	Not Published	NOT FOUND — no source explicitly names the pump type (e.g. gear, piston, etc.) for the CT2535. The Bobcat EU page lists 'Implement pump type · 26.00' but this appears to be a flow value (L/min), not a pump type descriptor.
Steering Flow	4.4 gpm	16.90
Implement Flow	8.2 gpm	26.00
Total Hydraulic Flow	12.6 gpm (4.4+8.2)	11.4 gpm
Hydraulic System Type	Open Center	NOT FOUND — no source explicitly labels a 'Hydraulic System Type' field for the CT2535. The EU Bobcat page lists 'Power steering pump (4 port)' and separate implement flow, suggesting an open-center or load-sensing split system, but no source uses that label explicitly.
System Operating Pressure	180 - 407.9 lbf/cm² for control valve	—
Rear Remote Hydraulic Flow	Not Published	N/A
Overall Hydraulic Pump Flow	12.6 gpm	11.4 gpm
No. of Optional Remote Valves	Optional (up to 2)	2 Pairs
No. of Standard Remote Valves	Not Published	Std. (4 port)
▶PTO & Hitch
PTO Rear	540 RPM	540 rpm
PTO Type	Independent	Independent
Lift Control Type	Position Control	Hydraulic Position Control System
Hitch Lift Capacity	3,306.9 lb	1631 lb.
Mid-PTO Availability	Not Published	Optional: 1988 rpm
Category, 3-Point Hitch	Cat 1	Category 1
Hitch Lift Capacity (at 24”)	2,425 lb	1,631 lb
▶Tire Options
R3 Turf - Rear	Not Published	41x14.0-20 R3
R3 Turf - Front	Not Published	27x8.5-15 R3
Tire Size & Options	Std (manual): 8.0-16 / 12.4-24; IND (website): 28X8.50-15 / 43X16.00-20	3,585 lb
R4 Industrial - Rear	43X16.00-20	15-19.5 R4
R4 Industrial - Front	28X8.50-15	25x8.5-14 R4
R1 Agricultural - Rear	12.4-24 6PR	11.2-24
R1 Agricultural - Front	8.0-16 4PR	7-16
▶Fluid Capacity
Coolant Capacity	1.32 gal	0.9 gal
Crankcase Capacity	1.14 gal	2 gal
Fuel Tank Capacity	7.13 gal	9.0 gal.
Front Axle Fluid Capacity	Not Published	1.6 gal
Transmission / Hydraulic System Capacity	9.77 u.s. gal (37 ℓ) HST	5.8 gal
▶Loader & Attachments
Loader Lift Height	104 in	100 in.
Loader Breakout Force	3,660 lb	3285 lb.
Quick Attach Loader System	SSQA	Standard Quick Attach Mounting System
Loader Lift Capacity (Full Height)	2,200 lb (at pivot pin)	1389 lb.
Loader Model	—	FL8
▶Transmission & Drivetrain
Clutch	None (HST)	Wet disc type
No. of Speeds	3 Range	3 range
Transmission Type	HST (3-range)	3-Range HST
Max Travel Speed (Forward)	19.08 mph (range C)	14.4 mph (23.1 km/hr.)
Max Travel Speed (Reverse)	19.08 mph (range C)	10.1 mph (16.2 km/hr.)
Differential Lock & Limited Slip Options	Differential lock	Std
▶Chassis, Steering & Controls
Brakes	Wet multi-disc	Wet Multi-disc
Steering	Fully hydraulic power steering	Hydrostatic Power Steering
Frame Type	Not Published	Not Published
Front Axle Type	Cast Iron	Manual (MEC)
Drawbar Capacity	Not Published	650.00 KG
Front Axle Rating	Not Published	Not Published
Seat Suspension & Adjustability	Not Published	Std
▶Dimensions & Maneuverability
Wheelbase	65.7 in	65.7 in.
Overall Width	56.7 in	63.0 in.
Overall Length	134.88 in.	—
Ground Clearance	15 in	12.3 in.
Height to Top of ROPS	96.85 in	91.0 in.
Height to Top of Cab Model	Not Applicable	2520.00 MM
Height to Top of ROPS (folded)	Not Published	Not Applicable
Min. Turn Radius without Brakes	Not Published	106.2 in.
Overall Length with 3-Point Hitch	134.88 in	120.9 in.
▶ITC Company Accessories
Accessories that fit	Brush Guard Side Guards $199.99 Bolt onto the side of the OEM guard and offers wrap around protection Branson TYM 15/20 Series--Bad Boy 40/50 Series Brush Screen $250.00	Brush Guard Side Guards $199.99 Bolt onto the side of the OEM guard and offers wrap around protection

Bad Boy Tractors 4035 vs Bobcat CT2535: Quick Answers

Which has more horsepower, the Bad Boy Tractors 4035 or the Bobcat CT2535?

They are effectively tied: both machines are rated at 34.9 hp hp for engine hp.

Which has more PTO horsepower, the Bad Boy Tractors 4035 or the Bobcat CT2535?

The Bad Boy Tractors 4035 leads on pto hp at 30 hp hp, compared to 29.4 hp hp for the Bobcat CT2535.

Which has more loader lift capacity, the Bad Boy Tractors 4035 or the Bobcat CT2535?

The Bad Boy Tractors 4035 leads on loader lift at 2,200 lb lb, compared to 1,389 lb lb for the Bobcat CT2535.

Which has more three-point hitch lift capacity, the Bad Boy Tractors 4035 or the Bobcat CT2535?

The Bad Boy Tractors 4035 leads on 3-pt lift (24 in) at 2,425 lb lb, compared to 1,631 lb lb for the Bobcat CT2535.

More Head-to-Heads

• Bad Boy Tractors 4035 vs Bobcat CT2035
• Bad Boy Tractors 4035 vs Bobcat CT2040
• Bad Boy Tractors 4035 vs Bobcat CT2540
• Bad Boy Tractors 4035 vs Bobcat CT4045
• Bad Boy Tractors 4035 vs Bobcat CT4545
• Bobcat CT2535 vs Bobcat CT2035
• Bobcat CT2535 vs Bobcat CT2040