John Deere 1025R vs TYM T254 | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Deluxe suspension seat with armrests and tilt steering wheel
Ergonomic seating
Front Axle Type
4WD (MFWD), on-the-go engagement
4WD center-pivot, reverse Eliot type
Front Axle Rating
1,349 lb
Not Published
Drawbar Capacity
2,165 lb
Not Published
Overall Width
47.22 in (R3 tires); 47.32 in (R4 tires)
45.8 in
Wheelbase
57.1 in
57.5 in
Ground Clearance
7.7 in (front axle)
9.4 in
Min. Turn Radius without Brakes
7.4 ft (no brakes, no MFWD)
100 in
Height to Top of ROPS
90 in (ROPS extended, R4 tires)
91.3 in
Height to Top of ROPS (folded)
73 in
Not Published
Height to Top of Cab Model
Not Published
Not Published
Overall Length
108 in
100.5 in (with 3-point hitch)
Tractor Weight (Base)
1,556 lb
1,638 lb (with ROPS)
Weight with ROPS and Loader
Not Published
Not Published
Weight with Cab and Loader
Not Published
Not Published
Tire Size & Options
Standard R4, optional R3
R1 Agricultural, R3 Turf, R4 Industrial, R4 Lg Industrial
R1 Agricultural - Front
Not Published
6.0-12
R1 Agricultural - Rear
Not Published
9.5-16
R3 Turf - Front
18x8.5-10
Turf Master 20x8.00-10 NHS TL 4PR
R3 Turf - Rear
26x12-12
Multi-Trac CS 29x12.50-15 NHS TL 4PR
R4 Industrial - Front
18x8.5-10
Trac Chief 20x8.00-10 NHS TL 4PR
R4 Industrial - Rear
26x12-12
Trac Chief 27x12.5-15 NHS TL 4PR
Quick Attach Loader System
Tool-free attach and park (MSL optional on 120R)
TX25P: Quick attach mechanism
Loader Model
120R (MSL or NSL); 120E (NSL only)
TX25P
Loader Lift Height
120R: 72 in; 120E: 71.2 in
TX25P: 75 in
Loader Lift Capacity (Full Height)
120R (MSL): 680 lb; 120E (NSL): 519 lb (at 19.7 in ahead of pivot)
TX25P: 948 lb (at pivot pin)
Loader Breakout Force
Not Published
TX25P: 1,680 lb (at pivot pin, ground level)
Warranty Length & Coverage
Powertrain 6 years, standard at no cost, covers residential and commercial use
Basic 24 months or 2,000 hours, parts and labor; non-commercial, 20 to 70 engine hp: powertrain 72 months or 3,000 hours; loaders, backhoes and mid-mount mowers 12 months
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
