John Deere 1025R vs TYM T254

Across 8 measurable specs, the TYM T254 leads 6 categories to 1 (1 tied). Machine pages: John Deere 1025R and TYM T254.

Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.

Category Verdict

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	John Deere1025R	TYMT254

▶Engine
PTO Power	18.2 hp	18.8 hp
Alternator	40 A	40 A, 12 V
Air Cleaner	Dual element with mechanical restriction indicator	Single dry
Engine Type	Diesel	3-cylinder, naturally aspirated diesel
Fuel System	Indirect injection	IDI
Displacement	77.3 in³	77.3 in³
No. of Cylinders	3	3
Rated Engine Speed	3200 rpm	3000 rpm
Cooling System Type	Water pump	Water-cooled
Engine Manufacturer	Yanmar	Yanmar
Engine Power (Gross)	23.9 hp @ 200 rpm	23.9 hp
Engine Emissions Constraints	Tier 4	Tier 4
▶Weight
Tractor Weight (Base)	Open station: 1556 lb	—
Weight with Cab and Loader	approx. 1,996 lb shipping weight with cab	Not Published
Weight with ROPS and Loader	approx. 1,444 lb shipping weight open station (no loader); operating weight with loader approx. 1,556 lb shipping	Not Published
▶Warranty
Warranty Length & Coverage	6-year / 2,000-hour powertrain warranty (standard); PowerGard extended warranty available	Up to 2 years or until the 2,000 hours mark, bumper-to-bumper warranty; 3000 hours maximum coverage period for parts and labour on drivetrains or powertrains; 12-months warranty period for implements, including loaders and backhoes.
▶Hydraulics
Pump Type	Single gear	Single gear pump
Steering Flow	3.5 gpm	2.8 gpm
Implement Flow	3.5 gpm	4.2 gpm
Total Hydraulic Flow	6.3 gpm 23.8 lpm	6.9 gpm
Hydraulic System Type	Open center	Open center
System Operating Pressure	2000 psi	—
Rear Remote Hydraulic Flow	3.5 gpm per pump (implement circuit); total system output 6.3 gpm	Not Published
Overall Hydraulic Pump Flow	3.5 gpm 13.2 lpm	6.9 gpm
No. of Optional Remote Valves	Three	1
No. of Standard Remote Valves	—	0
▶PTO & Hitch
PTO Rear	540 rpm	540 rpm
PTO Type	Independent	Independent
Lift Control Type	position control	Position control
Hitch Lift Capacity	758 lb	1,214 lb
Mid-PTO Availability	2100 rpm	Available
Category, 3-Point Hitch	Limited Category 1	Category I (Narrow)
Hitch Lift Capacity (at 24”)	758 lb	1,101 lb
▶Tire Options
R3 Turf - Rear	26x12-12	29x12.50-15
R3 Turf - Front	18x8.50-10	20x8.00-10
Tire Size & Options	Front: R3 Turf 18x8.50-10, R3 Turf Radial 18x8.50-10, R4 18x8.5-10 | Rear: R3 Turf 26x12-12, R4 26x12-12	R1 Agricultural, R3 Turf, R4 Industrial; R4 Lg Industrial (optional)
R4 Industrial - Rear	26x12-12	27x12.5-15; 12-16.5
R4 Industrial - Front	18x8.5-10	20x8.00-10; 23x8.50-12
R1 Agricultural - Rear	26x12.00-12 (R4 Industrial standard; R1 Agricultural not a standard listed option)	9.5-16
R1 Agricultural - Front	18x8.50-10 (R3 Turf / R4 Industrial listed; R1 Agricultural not a standard listed option)	6.0-12
▶Fluid Capacity
Coolant Capacity	0.98 gal	3.8 qt
Crankcase Capacity	0.71 gal	2.9 qt
Fuel Tank Capacity	5.6 gal	5.8 gal
Front Axle Fluid Capacity	0.74 gal	3.7 qt
Transmission / Hydraulic System Capacity	3.3 gal	3.7 gal
▶Loader & Attachments
Loader Lift Height	72 in to maximum height at pivot pin (120R loader)	75 in
Loader Breakout Force	120R: 1,823 lbf at pivot point; H120: 1,724 lbf at pivot point	1,680 lb
Quick Attach Loader System	120R Quik-Park Loader System	TX25P: Quick attach mechanism
Loader Lift Capacity (Full Height)	120R: 754 lb at pivot point to max height; H120: 703 lb at pivot point to max height	948 lb
▶Transmission & Drivetrain
Clutch	wet disc	Not applicable
No. of Speeds	Infinite (hydrostatic), 2-range (Hi/Lo) forward and reverse	Infinite 2-Range
Transmission Type	hydrostatic	HST
Max Travel Speed (Forward)	9.1 mph	11.0 mph
Max Travel Speed (Reverse)	9.1 mph	Not Published
Differential Lock & Limited Slip Options	Differential lock Yes; Limited slip differential No	Differential lock
▶Chassis, Steering & Controls
Brakes	Wet disc (left-hand pedal)	Wet disc
Steering	Power	Hydrostatic
Frame Type	Semi-flat platform; two-post folding ROPS; 4WD with mechanical front-wheel drive	Not Published
Front Axle Type	Four-wheel drive	Not Published
Front Axle Rating	Front 1349 lb	Not Published
Seat Suspension & Adjustability	Premium seat; adjusts fore/aft; seat flips forward; high seat back and armrests; retractable seat belt	Ergonomic seating
Drawbar Capacity	—	Not Published
▶Dimensions & Maneuverability
Wheelbase	57.1 inches 57.1 in	57.5 in
Overall Width	47 in	45.8 in
Ground Clearance	7.7 in.	9.4 in
Min. Turn Radius without Brakes	2.51 m 8.2 ft	100 in
Height to Top of ROPS	—	91.3 in
Height to Top of Cab Model	—	Not Published
Height to Top of ROPS (folded)	—	Not Published
Overall Length with 3-Point Hitch	—	100.5 in
▶ITC Company Accessories
Accessories that fit	None tagged yet	Brush Guard Side Guards $200.00 Bolt onto the side of the OEM guard and offers wrap around protection RK24/T254 /BRANSON 2505/EMAX 25 Skid Plate $89.99 TYM T254 / T2505 Rural King RK24 Mahindra EMAXX 25 Brush Screen Insert $250.00

John Deere 1025R vs TYM T254: Quick Answers

Which has more horsepower, the John Deere 1025R or the TYM T254?

They are effectively tied: both machines are rated at 23.9 hp hp for engine hp.

Which has more PTO horsepower, the John Deere 1025R or the TYM T254?

The TYM T254 leads on pto hp at 18.8 hp hp, compared to 18.2 hp hp for the John Deere 1025R.

Which has more loader lift capacity, the John Deere 1025R or the TYM T254?

The TYM T254 leads on loader lift at 948 lb lb, compared to 754 lb lb for the John Deere 1025R.

Which has more three-point hitch lift capacity, the John Deere 1025R or the TYM T254?

The TYM T254 leads on 3-pt lift (24 in) at 1,101 lb lb, compared to 758 lb lb for the John Deere 1025R.

More Head-to-Heads