▶ EngineEngine Manufacturer Yanmar Mitsubishi Engine Model 3TNV82A-BMJK S3L2 Engine Type 3-cylinder liquid-cooled diesel Four stroke, indirect injection water-cooled, diesel No. of Cylinders 3 3 Displacement 81.2 in³ 80.4 in³ Rated Engine Speed 2600 rpm 2600 rpm Engine Power (Gross) 26.5 hp 28 hp PTO Power 20.5 hp Shuttle: 23.5 hp; HST: 22 hp Engine Emissions Constraints Not Published Not Published Cooling System Type Liquid-cooled Not Published Air Cleaner Dry type, two stage Not Published Fuel System Not Published Direct injection Alternator 20 A 50 A, 12 V ▶ HydraulicsPump Type Not Published Not Published Implement Flow 5.0 gpm 4.6 gpm Steering Flow 5.5 gpm 2.7 gpm Total Hydraulic Flow 10.5 gpm Not Published Overall Hydraulic Pump Flow 10.5 gpm Not Published Hydraulic System Type Not Published Open center, full live hydraulic with position control Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves 2 Not Published No. of Optional Remote Valves Not Published 1 spool optional ▶ Fluid CapacityFuel Tank Capacity 7.1 gal 6.1 gal Coolant Capacity 4.1 qt Not Published Crankcase Capacity 3.0 qt Not Published Transmission / Hydraulic System Capacity 3.9 gal Not Published Front Axle Fluid Capacity 3.6 qt Not Published ▶ PTO & HitchPTO Type Independent Trans PTO Rear 540 rpm (rear PTO standard) 540 rpm @ 2376 rpm Mid-PTO Availability Standard Optional, 2000 rpm @ 2526 rpm Category, 3-Point Hitch Category 1 Category 1, with check chains Hitch Lift Capacity 1433 lb 2205 lb Hitch Lift Capacity (at 24”) 1150 lb Not Published Lift Control Type Position control Position control ▶ Transmission & DrivetrainTransmission Type 2-range hydrostatic Constant mesh on gear shift and synchro mesh on F/R shuttle No. of Speeds Infinite forward and reverse, 2 ranges Infinite Max Travel Speed (Forward) 13.0 mph Not Published Max Travel Speed (Reverse) 13.0 mph Not Published Clutch Not Published Single plate, dry Differential Lock & Limited Slip Options Not Published Not Published ▶ Chassis, Steering & ControlsFrame Type Folding ROPS standard Not Published Steering Power steering Hydrostatic Power Brakes Wet disk Wet disc Seat Suspension & Adjustability Not Published Not Published Front Axle Type Mechanical front wheel drive (MFWD), standard, all ranges, engages on the go Not Published Front Axle Rating 1940 lb Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Length with 3-Point Hitch 108.9 in 109.3 in Overall Width 51.0 in (minimum, standard tires) 54.3 in Wheelbase 65.2 in Not Published Ground Clearance 13 in (front axle); 11 in (rear axle drawbar) Not Published Min. Turn Radius without Brakes 8.2 ft 6.6 ft Height to Top of ROPS 90 in Not Published Height to Top of ROPS (folded) 68.9 in Not Published Height to Top of Cab Model Not Published Not Published ▶ WeightTractor Weight (Base) 1865 lb Shuttle: 1819 lb; HST: 1863 lb Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options R3 turf standard (24x8.5-14 front, 36x14.00-15 rear); R4 industrial optional (23x8.5-12 front, 14-17.5 rear) Not Published R1 Agricultural - Front Not Published 7x12 R1 Agricultural - Rear Not Published 9.5x16 R3 Turf - Front 24x8.5-14 23x8.5-12 R3 Turf - Rear 36x14.00-15 33x12.5-16.5 R4 Industrial - Front 23x8.5-12 23x8.5-12 R4 Industrial - Rear 14-17.5 12x16.5 ▶ Loader & AttachmentsQuick Attach Loader System Quik-Park loader mounting; 200CX attaches and detaches in under 3 minutes with no tools Skid-steer style loader couplers Loader Model 200CX ML205 (named by both Mahindra spec sheets; a US listing calls the same loader the ML202) Loader Lift Height 200CX: 78.5 in ML205: 82.7 in Loader Lift Capacity (Full Height) 200CX: 800 lb (at full height, measured at pivot) ML205: 1402 lb Loader Breakout Force 200CX: 2239 lbf (at pin) ML205: 2690 lb ▶ WarrantyWarranty Length & Coverage 3-year / 2,000-hour limited warranty (as sold new) Not Published 