▶ EngineEngine Manufacturer Yanmar TYM Engine Model 3TNV84T-KJT T2000N2 Engine Type 3-cylinder turbocharged liquid-cooled diesel, direct injection 4-cylinder, naturally aspirated diesel No. of Cylinders 3 4 Displacement 91.5 in³ 139.5 in³ Rated Engine Speed 2800 rpm 2600 rpm Engine Power (Gross) 41 hp 41 hp PTO Power 32.5 hp 36 hp Engine Emissions Constraints Not Published Tier 4 Cooling System Type Liquid-cooled Water-cooled Air Cleaner Dry type with safety element Dry element Fuel System Direct injection, self bleeding, in-line fuel pump with electric shutoff IDI Alternator 40 A 50 A, 12 V ▶ HydraulicsPump Type Dual tandem gear pump Dual gear pump Implement Flow 9.2 gpm 11.4 gpm Steering Flow 5.7 gpm 5.2 gpm Total Hydraulic Flow 14.8 gpm 16.5 gpm Overall Hydraulic Pump Flow 14.8 gpm 16.5 gpm Hydraulic System Type Open center Open center Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves 2 Rear: 0 (loader: 2) No. of Optional Remote Valves Not Published Up to 4 ▶ Fluid CapacityFuel Tank Capacity 11.5 gal 7.1 gal Coolant Capacity 1.4 gal 5.8 qt Crankcase Capacity 4.5 qt 4.8 qt Transmission / Hydraulic System Capacity 8.3 gal 4215R: 9 gal; 4215H: 9.8 gal Front Axle Fluid Capacity 1.2 gal 6.8 qt ▶ PTO & HitchPTO Type Independent, wet disk clutch Independent PTO Rear 540 rpm 540 rpm Mid-PTO Availability Not Published Not Published Category, 3-Point Hitch Category 1 Category I Hitch Lift Capacity Not Published 3,306 lb Hitch Lift Capacity (at 24”) 2200 lb 2,425 lb Lift Control Type Position control Position control ▶ Transmission & DrivetrainTransmission Type 2-range hydrostatic 4215R: Synchromesh shuttle; 4215H: HST No. of Speeds Infinite forward and reverse, 2 ranges 4215R: 12 forward / 12 reverse; 4215H: 3-range hydrostatic Max Travel Speed (Forward) 13 mph 4215R: 14.4 mph; 4215H: 18.8 mph Max Travel Speed (Reverse) 12.6 mph 4215R: 14.3 mph; 4215H: 18.7 mph Clutch Wet disk 4215R: Dry single plate; 4215H: Not applicable (HST) Differential Lock & Limited Slip Options Mechanical rear differential lock (ball, ramp and pin) Differential lock (standard) ▶ Chassis, Steering & ControlsFrame Type Fixed ROPS; four-wheel drive standard Not Published Steering Hydrostatic power steering Hydrostatic Brakes Wet disk Wet, multi-disc Seat Suspension & Adjustability Not Published Suspension seat Front Axle Type Mechanical front wheel drive (MFWD), standard, all ranges Not Published Front Axle Rating 3197 lb Not Published Drawbar Capacity 882 lb Not Published ▶ Dimensions & ManeuverabilityOverall Length with 3-Point Hitch 120.2 in 120.9 in Overall Width 63 in (minimum, R1 rear tires); 65.8 in (maximum, R4 rear tires) 56.3 in Wheelbase 68 in 65.7 in Ground Clearance 14.7 in (front axle) 14.4 in Min. Turn Radius without Brakes Not Published 124.8 in (left); 121.3 in (right) Height to Top of ROPS 87.6 in 97.3 in Height to Top of ROPS (folded) Not Published Not Published Height to Top of Cab Model Not Published Not Published ▶ WeightTractor Weight (Base) 2899 lb 4215R: 3,278 lb; 4215H: 3,258 lb Weight with ROPS and Loader Not Published HST: 4,266 lb; Gear: 4,286 lb Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options R1 bar tread (8.00-16 front, 14.9-24 rear) or R4 industrial (10.0-16.5 front, 17.5L-24 rear) R1 Agricultural, R3 Turf, R4 Industrial R1 Agricultural - Front 8.00-16 8-16 R1 Agricultural - Rear 14.9-24 12.4-24 R3 Turf - Front Not Published 27x8.5-15, 6PR R3 Turf - Rear Not Published 41x14.00, 4PR R4 Industrial - Front 10.0-16.5 10-16.5, 6PR (standard); 25x8.50-14 (option) R4 Industrial - Rear 17.5L-24 420/70-24, 6PR (standard); 15x19.5 (option) ▶ Loader & AttachmentsQuick Attach Loader System Not Published BL150: quick attachment assembly Loader Model 300CX BL150 Loader Lift Height H165: 103 in; 320R: 103 in BL150: 104.9 in Loader Lift Capacity (Full Height) 300CX: 1393 lb (at full height, measured at pivot) BL150: 2,200 lb Loader Breakout Force H165: 3769 lbf; 320R: 3769 lbf; 300CX: 3769 lbf (at pivot point) BL150: 3,422 lb ▶ WarrantyWarranty Length & Coverage 3-year / 2,000-hour limited warranty (as sold new) Bumper-to-bumper 24 months or 2,000 hours (parts and labor); powertrain 72 months or 3,000 hours for non-commercial use (36 months or 2,000 hours rental and commercial); loaders and backhoes 12 months ▶ ITC Company AccessoriesAccessories that fit None tagged yet 
