Compare Tractors

See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.

2 of 4 selected

n/a

KiotiCS2510

n/a

NewHollandWorkmaster25

Comparison loaded for 2 tractors.

The headline numbers at a glance.

Kioti CS2510New Holland Workmaster 25

Engine HPhp

▲24.5 hp

24.4 hp

PTO HPhp

18.5 hp

▲19.2 hp

17.1 hp

GearHST

Weightlb

1,485 lb

2,434 lb

▲2,469 lb

GearHST

Loader Liftlb

683.4 lb

▲1,600 lb

3-Pt Lift (24 in)lb

700 lb

▲1,433 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	KiotiCS2510	New HollandWorkmaster 25


Engine Manufacturer	KIOTI	Mitsubishi
Engine Model	3C100LFH-U2	S3L2-W461GT
Engine Type	In-Line Vertical, Water-Cooled 4-Cycle Diesel (3-cylinder)	3-cylinder, naturally aspirated, liquid-cooled diesel
No. of Cylinders	3	3
Displacement	61.5 in³	80.4 in³
Rated Engine Speed	3200 rpm	2500 rpm
Engine Power (Gross)	24.5 hp	24.4 hp
PTO Power	18.5 hp	Gear: 19.2 hp; HST: 17.1 hp
Engine Emissions Constraints	Not Published	Tier 4
Cooling System Type	Liquid-cooled	Pressurized liquid with recirculating bypass
Air Cleaner	Dry type (cyclone type)	Dual element dry air cleaner (outer and inner element)
Fuel System	Injection pump type: Bosch; nozzle type: Throttle	In-line injection pump
Alternator	40 A, 12 V	50 A, 12 V

Pump Type	Gear	Mechanical
Implement Flow	Not Published	7.9 gpm
Steering Flow	Not Published	4.6 gpm
Total Hydraulic Flow	6.5 gpm	12.5 gpm
Overall Hydraulic Pump Flow	6.5 gpm	12.5 gpm
Hydraulic System Type	Open center	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	Not Published	0
No. of Optional Remote Valves	Not Published	1 or 2

Fuel Tank Capacity	6.7 gal	7.4 gal
Coolant Capacity	3.7 qt	1.3 gal
Crankcase Capacity	3.2 qt	4.4 qt
Transmission / Hydraulic System Capacity	3.4 gal	8.5 gal
Front Axle Fluid Capacity	0.5 gal	6.9 qt

PTO Type	Independent	Independent, electro-hydraulic engagement
PTO Rear	540 rpm	540 rpm
Mid-PTO Availability	Available (2,200 rpm)	HST: Standard; Gear: Optional (2,000 rpm)
Category, 3-Point Hitch	Category I	Category I
Hitch Lift Capacity	1,580 lb	1,808 lb
Hitch Lift Capacity (at 24”)	700 lb	1,433 lb
Lift Control Type	Position	Position control

Transmission Type	HST (hydrostatic)	Gear: 12x12 synchronized shuttle; HST: 3-range hydrostatic, dual pedal
No. of Speeds	Infinite, 2 range (High/Low)	Gear: 12F/12R; HST: Infinite (3 ranges)
Max Travel Speed (Forward)	10.3 mph	HST: 14.33 mph; Gear: 13.78 mph
Max Travel Speed (Reverse)	7.0 mph	Gear: 13.10 mph; HST: 10.79 mph
Clutch	None (hydrostatic transmission)	Gear: 9.4 in disc; HST: Not applicable
Differential Lock & Limited Slip Options	Rear differential lock (standard)	Mechanical rear differential lock

Frame Type	Not Published	Not Published
Steering	Hydrostatic power steering	Power steering
Brakes	Wet disk type	Wet disc
Seat Suspension & Adjustability	Not Published	Not Published
Front Axle Type	Mechanical 4WD	4WD
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Length with 3-Point Hitch	99.3 in	117.2 in
Overall Width	46.7 in	54.1 in
Wheelbase	55.1 in	65.9 in
Ground Clearance	6.4 in	13 in
Min. Turn Radius without Brakes	8.33 ft (with brake applied)	120 in (left turn); 129.8 in (right turn)
Height to Top of ROPS	87.6 in	88.2 in
Height to Top of ROPS (folded)	Not Published	68.2 in
Height to Top of Cab Model	Not Published	Not Published

Tractor Weight (Base)	1,485 lb	Gear: 2,434 lb; HST: 2,469 lb
Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	R1 Agricultural, R3 Turf and R4 Industrial: 18x8.5-10 front, 26x12.00-12 rear	R1 Agricultural, R3 Turf, R4 Industrial
R1 Agricultural - Front	18x8.5-10	7-14
R1 Agricultural - Rear	26x12.00-12	11.2-24
R3 Turf - Front	18x8.5-10	25x8.50-14
R3 Turf - Rear	26x12.00-12	41x14.00-20
R4 Industrial - Front	18x8.5-10	25x8.50-14
R4 Industrial - Rear	26x12.00-12	43x16-20

Quick Attach Loader System	Quick attach (QA) bucket, 48 in	200LC: Quick Mount system, no tools needed; optional skid steer quick attach plates
Loader Model	SL2410	200LC
Loader Lift Height	SL2410: 70.9 in	200LC: 94.3 in
Loader Lift Capacity (Full Height)	SL2410: 683.4 lb	200LC: 1,600 lb
Loader Breakout Force	SL2410: 1,435.2 lb	200LC: 2,637 lb

Warranty Length & Coverage	Tractors (Non-Commercial Application): 24 months, unlimited hours, parts & labor; Non-commercial powertrain (engine and driveline) on qualifying tractors: 72 months, unlimited hours, parts & labor	Boomer Guard6 limited warranty: 2 years or 750 hours full coverage plus powertrain coverage to 6 years or 1,500 hours total

Accessories that fit	Brush Guard Side Guards $199.99 Bolt onto the side of the OEM guard and offers wrap around protection Kioti DK10/20 & CK10/20 with 6 bolt Grill Guard Brush Screen Insert $250.00	None tagged yet

Find a KIOTI dealer near you Find a New Holland dealer near you

Permanent page for this matchup: Kioti CS2510 vs New Holland Workmaster 25

Save it & share

Email this to yourself or share with a friend

We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.

More in the resource center

Look up a tractor

The Netflix of tractor videos

Tractor guides and articles

Compare Tractors

Full Spec Sheet

Email this to yourself or share with a friend