See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Every published spec, side by side, including the details the graphs above don't chart.
Spec
LS TractorMT125
Case IHFarmall Compact 25A
PTO Power
17.2 hp
19.2 hp
Alternator
40 A, 12 V
Not Published
Air Cleaner
Dry
Not Published
Engine Type
3-cylinder, Indirect-injection, Water-cooled
Diesel, naturally aspirated
Fuel System
Indirect Injection
Not Published
Displacement
77.3 in³
79.3 in³
No. of Cylinders
3
3
Rated Engine Speed
3000 rpm
2500 rpm
Cooling System Type
Water-cooled
Not Published
Engine Manufacturer
Yanmar
Not Published
Engine Power (Gross)
24.7 hp
24.6 hp
Engine Emissions Constraints
Tier 4
Tier 4
Tractor Weight (Base)
1,444 lbs
—
Weight with ROPS and Loader
1444 lb
Not Published
Weight with Cab and Loader
Not Published
Not Published
Warranty Length & Coverage
6-Year Limited Warranty
Not Published
Pump Type
Gear pump type, Transmission drive
Not Published
Steering Flow
2.1 gpm
Not Published
Implement Flow
4.6 gpm
7.9 gpm
Total Hydraulic Flow
6.7 gpm
Not Published
Hydraulic System Type
Open center system, Position control
Open center
System Operating Pressure
12.7~13.2 MPa (1849~1920 psi)
—
Rear Remote Hydraulic Flow
NOT FOUND — No source explicitly lists a dedicated 'Rear Remote Hydraulic Flow' spec. The closest published figure is the implement pump flow of 4.6 gpm, but no source labels this specifically as 'Rear Remote' flow.
0 (standard) / 1 (optional) (DIA)
Overall Hydraulic Pump Flow
6.7 gpm
Not Published
No. of Optional Remote Valves
1 Set
1
No. of Standard Remote Valves
0 (optional)
0
PTO Rear
540 rpm
540 rpm
PTO Type
Independent
Not Published
Lift Control Type
Position Control
Not Published
Hitch Lift Capacity
970 lbs. (At 24 in: 728)
1,433 lb @ 24 in behind pin
Mid-PTO Availability
Standard (2,500 rpm)
Optional mid-PTO (2,000 rpm)
Category, 3-Point Hitch
Category 1
Category 1
Hitch Lift Capacity (at 24”)
728 lb
1,433 lb @ 24 in behind pin
R3 Turf - Rear
26x12.0-12 4PR HSR82 (Turf)
Not Published
R3 Turf - Front
18x8.50-10 4PR HS482 (Turf)
Not Published
Tire Size & Options
Industrial Front/Rear 18×18.5 - 10/26 x 12.0 - 12; Versa Turf Front/Rear: 18×18.5 - 10/26 x 12.0 - 12
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
