Mahindra 3616 vs Mahindra 1533 | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Front Mounted, Engine Driven, Pressure Loading Gear Type
Not Published
Implement Flow
7.7 gpm at 2600 rpm
7.7 gpm
Steering Flow
3.4 gpm at 2600 rpm
3.4 gpm
Total Hydraulic Flow
Not Published
11.1 gpm (7.7 + 3.4, computed)
Overall Hydraulic Pump Flow
Not Published
Not Published
Hydraulic System Type
Open center
Open center
Rear Remote Hydraulic Flow
Not Published
Not Published
No. of Standard Remote Valves
Not Published
Not Published
No. of Optional Remote Valves
1 (optional)
1
Fuel Tank Capacity
7.1 gal
7.7 gal
Coolant Capacity
Not Published
Not Published
Crankcase Capacity
Not Published
Not Published
Transmission / Hydraulic System Capacity
Not Published
Not Published
Front Axle Fluid Capacity
Not Published
Not Published
PTO Type
Gear Drive: independent; Hydrostatic Drive: live, with internal overrunning clutch
Independent (1533 Shuttle); Live (1533 HST)
PTO Rear
540 rpm @ 2376 rpm
540 rpm @ 2376 rpm
Mid-PTO Availability
Optional, 2000 rpm @ 2525 rpm
Optional; 2000 rpm @ 2525 rpm
Category, 3-Point Hitch
Category I
CAT I with telescopic stabilizers
Hitch Lift Capacity
2,646 lb
2,646 lb
Hitch Lift Capacity (at 24”)
1,720 lb
Not Published
Lift Control Type
Position control
Position control
Transmission Type
Gear Drive: synchromesh shuttle and constant-mesh main gear shift, two ranges of selective sliding gears; Hydrostatic Drive: HST, three ranges of selective sliding gears
Constant mesh on gear shift, synchro mesh on F/R shuttle (1533 Shuttle); 3 range HST (1533 HST)
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
