Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Mike makes a buying-advice case for pallet forks, walking through fork length trade-offs (42 vs. 48 inch), headache rack importance, and the 23-degree forward-rake spec to watch for on cheaper forks. He also distinguishes bale forks from bale spikes, warns against using either as a pallet-fork substitute, and demos a combination unit called the Spork. Best for newcomers still building out their first attachment kit.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
42-inch forks are more maneuverable in tight areas and usually fit under one pallet. 48-inch forks handle longer pallets and let you slide a load further into a pickup bed.
It's the industry standard tilt built into the fork frame so forks sit angled forward when locked in, matching the angle of tractor loader buckets for proper function.
Mike strongly recommends against it. Cheap bale forks can bend their spikes if used to lift pallet loads, costing as much to replace as buying a proper pallet fork set.
A bale fork has two spikes down low, while a bale spike has one spike up high with two small stabilizers down low to keep the bale from rotating.