Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a narrow, mechanical how-to: a presenter named Phil walks through the exact cable-and-winch procedure for raising and lowering the cutter bar on an SB 165 double-acting cable bar mower, step by step with tape markers, eyelets, and the locking pin. It doesn't cover specs, pricing, or general mower operation, just this one maintenance task. Best for current SB 165 owners needing the specific procedure, not shoppers comparing mowers.
Posted by Small Farm Innovations, a company that sells this forage equipment, so the video serves as owner instruction rather than independent review.
Unwind cable to the second tape mark, hook it into the eyelet, keep tension, then reverse the winch to raise the bar until the bumper contacts the frame, then lock with the lynch pin.
Remove the lynch pin, raise the locking mechanism out of the way, then use the drill and worm gear winch to retract cable to the marked point, letting the bar come down while the mower is off the ground.
A worm gear system is used so the handle does not fly around and hit the operator's hand and cause injury.
No, the mower should be off the ground when raising or lowering the cutter bar.